NGC-30-Cxx

DRAFT NELSON Job N° 075236 Date: 28/04/08 NGC-30-CR NGC-30-CRM NGC-30-CRMS NGC-30-CTM NGC-30-CVM Document Install-113 Installation Instructions Montageanleitung Instructions d’installation www.DataSheet.in NGC-30-CR NGC-30-CRM NGC-30-CRMS NGC-30-CTM NGC-30-CVM Installation Instructions Description Control and monitoring modules for use with DigiTrace NGC-30 The DigiTrace® NGC-30 is a multi-circuit electronic control, monitoring and power distribution system for heat-tracing used in process-temperature maintenance and freeze-protection applications. The NGC-30-CRM/-CRMS and NGC-30-CTM provide ground-fault and line current sensing, alarming, switching and RTD inputs for five heat-tracing circuits when used with the NGC-UIT. The NGC-30-CRM is to control electromechanical relays (EMRs) and the NGC-30-CRMS is used to control solid state relays (SSRs). Tools Required Screw driver small blade - standard RJ11 stripping/crimping tool Wire cutters RJ11 connectors Additional Materials Power supply - 12 Vdc @ 400 mA‑per NGC-30-CRM/-CRMS board RJ11 4 conductor cable Kit Contents Item A B C D General Approvals/Certifications Non-hazardous Locations Hazardous Locations Supply Voltage Internal power consumption Ambient operating temperature Ambient storage temperature Environment Max. altitude Humidity Class I, Div. 2, Groups A,B,C,D Ex nC IIC T5 Class I, Zone 2, AEx nC IIC T5 Qty Description 1 NGC-30-CRM or CRMS (card rack module with connector...