8 Megabit 1.8V Serial Flash Memory
EN25S80
EN25S80
8 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
• Single power supply operation ...
Description
EN25S80
EN25S80
8 Megabit 1.8V Serial Flash Memory with 4Kbyte Uniform Sector
FEATURES
Single power supply operation - Full voltage range: 1.65-1.95 volt Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3 8 M-bit Serial Flash - 8 M-bit/1024 K-byte/4096 pages - 256 bytes per programmable page Standard or Dual SPI - Standard SPI: CLK, CS#, DI, DO, WP#, HOLD# - Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD# High performance - 75MHz clock rate for one data bit - 50MHz clock rate for two data bits Low power consumption - 7 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: 256 sectors of 4-Kbyte 16 blocks of 64-Kbyte Any sector or block can be erased individually Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed Page program time: 1.3ms typical Sector erase time: 90ms typical Block erase time 500ms typical Chip erase time: 5 Seconds typical
Lockable 256 byte OTP security sector Minimum 100K endurance cycle Package Options 8 pins SOP 150mil body width 8 pins SOP 200mil body width 8 contact VDFN All Pb-free packages are RoHS compliant
Industrial temperature Range
GENERAL DESCRIPTION
The EN25S80 is an 8 Megabit (1024K-byte) Serial Flash memory, with advanced write protection mechanisms. The EN25S80 supports the standard Serial Peripheral Interface (SPI), and a high performance Dual output...
Similar Datasheet