Document
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
PACKAGE OUTLINE DIMENSIONS
REV:A / 03
1.20 R0.10
1.10
0.55
2.10
0.55
5.00°
1.10 0.48 ~ 0.50 0.50
Notes: 1. All dimensions are in millimeters. 2. Tolerance is ± 0.1mm (.004") unless otherwise noted.
Features
Top view, wide view angle, single color Chip LED. Package in 8mm tape on 7" diameter reels. Compatible with automatic Pick & Place equipment. Compatible with Infrared and Wave soldering reflow solder processes. EIA STD package. I.C. compatible.
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 1
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Chip Materials
Dice Material : AlInGaP Light Color : Super Green Lens Color : Water Clear
REV:A / 03
Absolute Maximum Ratings(Ta=25℃)
Symbol PD IPF IF VR ESD Topr Tstg Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current De-rating Linear From 25℃ Reverse Voltage Electrostatic Discharge Threshold(HBM) Operating Temperature Range Storage Temperature Range Wave Soldering Condition (Two times Max.)
Note A
Parameter
Rating 60 60 30 0.25 5 2000 -40 ~ +85 -40 ~ +85 260 (for 5 seconds)
Unit mW mA mA mA/℃ V V ℃ ℃ ℃ ℃
Infrared Soldering Condition (Two times MAX.) 240 (for 10 seconds)
Note A : HBM : Human Body Model. Seller gives no other assurances regarding the ability of to withstand ESD.
Electro-Optical Characteristics(Ta=25℃)
Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current Symbol IV 2θ1/2 λp λd Δλ VF IR Min. 16.0 Typ. 30.0 130 571 570 15 2.05 2.4 100 Max. 60.0 Unit mcd deg nm nm nm V μA IF =20mA VR = 5V Test Condition IF=20mA Note 2 Measurement @Peak IF=20mA
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 2
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Notes:
1. Luminous intensity is measured with a light sensor and filter combination that proximities the CIE eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4. Caution in ESD : Static Electricity and surge damages the LED. It is recommend use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. Major standard testing equipment by “Instrument System” Model : CAS140B Compact Array Spectrometer and “KEITHLEY” Source Meter Model : 2400.
REV:A / 03
Typical Electro-Optical Characteristics Curves
Fig.1 Relative Intensity vs. Wavelength
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 3
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Typical Electro-Optical Characteristics Curves
(25℃Ambient Temperature Unless Otherwise Noted)
REV:A / 03
Fig.2 Forward Current vs.Forward Voltage
Luminous lntensity(mcd) Fig.3 Luminous Intensity vs.Forward Current 1000 Relative Luminous lntensity Normalized of 20mA Relative luminous intensity(%) 100 10 1 -60 -40 -20 -0 20 40 60 80 100 Ambient Temperature Ta(℃) Fig.4 Relative Luminous Intensity vs.Forward Current Fig.5 Luminous Intensity vs.Ambient Temperature
50 Forward Current IF(mA) 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7 0.5 0.3
0°
10°
20° 30°
40° 50° 60° 70° 80° 90°
0.1 0.2 0.4 0.6
Ambient Temperature Ta(℃) Fig.6 Forward Current Derating Curve Fig.7 Relative Intensity vs.Angle
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 4
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Label Explanation
BATCH: L1 B9 AC L1: Luminous Intensity Code B9: Forward Voltage Code AC: Dom Wavelength Code
REV:A / 03
Reel Dimensions
Notes: 1. Taping Quantity : 3000PCS 2. The tolerances unless mentioned is±0.1mm, Angle±0.5°, Unit : mm.
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 5
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Package Dimensions Of Tape And Reel
REV:A / 03
Progressive direction
Polarity
Notes:All dimensions are in millimeters.
Moisture Resistant Packaging
Label
Reel
Label Aluminum moistue-proof bag Desiccant
240
145
255
Label
T LIGH
210
Box
435
Carton
Notes : One reel in a bag, one bag in a inner box, ten inner boxes in a carton. Unit : mm.
DRAWING NO. : DS-71-03-0005
DATE : 2004-06-07
PAGE 6
www.DataSheet.in
SURFACE MOUNT DEVICE LED Part No. : L-C150KGCT
Cleaning
If cleaning is required , use the following solutions for less than 1 minute and less than 40℃. Appropriate chemicals: Ethyl alcohol and isopropyl alcohol. Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of PCB and LED mounting method. The use of ultrasonic cleaning should be enforced at proper output after confirming there is no problem.
REV:A / 03
Suggest Soldering Pad Dimensions
Direction of PWB camber and .