CHIP BEADS. CB160808T-400Y-C3 Datasheet


CB160808T-400Y-C3 BEADS. Datasheet pdf. Equivalent


CB160808T-400Y-C3


EMI MULTILAYER FERRITE CHIP BEADS
THE

FULL RANGE OF FERRITE BEADS LARGE ASSORTMENT OF FERRITE CLAMPS

EMI SUPPRESSION DEVICES

ALLPOWER SOURCE

ATTENUATION OF CONDUCTED NOISE FLAT CABLE CLAMPS COMMON MODE BALUNS FERRITE BEADS D-SUBCONNECTOR NOISE SUPPRESSORS

ALLPOWER DIVISION
TECHNOLOGY DYNAMICS INC. 100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702

www.theallpower.com
www.DataSheet.in

ALLP WER
SOURCE

THE

IRON POWDER CORES

1. Applications and Characteristics: If the design frequency is below 300KHz, the preferred choice of RF circuits for the iron powder core are: DC power supply chokes, motors, dimmer control filteres and other EMI/RFI circuits.

2. Temperature Effects: The iron powder core is well suited from -55°C to +125°C. Because the iron powder core does not have a low curie temperature it will function to several hundred degrees Celcius. However, continued operation above 200°C may result in a permanent shift in characteristic. EPOXY COATING: 94V-0 COLOR CODE: YELLOW/WHITE

5. Iron Powder Material Properties

PROPERTY Initial Permeability Curie Temperature Pratical Frequency Range Specific Gravity Temperature Stability (+)

UNIT

SYBOL mi

26 75 >300 1-300

o

C

Tc

KHZ d Ppm/oC

6.7 780

THE

ALLPOWER SOURCE

DIVISION OF TECHNOLOGY DYNAMICS INC. Fax (201) 385-0702
tdisales@theallpower.com

100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500
www. theal...



CB160808T-400Y-C3
THE ALLPOWER SOURCE
EMI SUPPRESSION DEVICES
FULL RANGE OF FERRITE BEADS
LARGE ASSORTMENT OF FERRITE CLAMPS
ATTENUATION OF CONDUCTED NOISE
FLAT CABLE CLAMPS
COMMON MODE BALUNS
FERRITE BEADS
D-SUBCONNECTOR NOISE SUPPRESSORS
ALLPOWER DIVISION
TECHNOLOGY DYNAMICS INC.
100 School Street, Bergenfield, NJ 07621 Phone: (201) 385-0500, Fax: (201) 385-0702
www.theallpower.com
www.DataSheet.in

CB160808T-400Y-C3
THE
ALLP WER
SOURCE
IRON POWDER CORES
1. Applications and Characteristics:
If the design frequency is below 300KHz, the preferred
choice of RF circuits for the iron powder core are: DC
power supply chokes, motors, dimmer control filteres
and other EMI/RFI circuits.
2. Temperature Effects:
The iron powder core is well suited from -55°C to +125°C. Because the iron powder core does not have a low
curie temperature it will function to several hundred degrees Celcius. However, continued operation above
200°C may result in a permanent shift in characteristic.
EPOXY COATING: 94V-0
COLOR CODE: YELLOW/WHITE
5. Iron Powder Material Properties
PROPERTY
Initial
Permeability
Curie
Temperature
Pratical
Frequency Range
Specific
Gravity
Temperature
Stability (+)
UNIT
oC
KHZ
Ppm/oC
SYBOL
mi
Tc
d
26
75
>300
1-300
6.7
780
THE ALLPOWER SOURCE DIVISION OF TECHNOLOGY DYNAMICS INC.
100 School Street, Bergenfield, NJ 07621 Phone (201) 385-0500 Fax (201) 385-0702
www. theallpower.com
tdisales@theallpower.com
www.DataSheet.in
26




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)