Document
Single Supply 3.0 V to 44 V Operational Amplifiers
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
Quality bipolar fabrication with innovative design concepts are employed for the MC33071/72/74, MC34071/72/74, NCV33072/74A series of monolithic operational amplifiers. This series of operational amplifiers offer 4.5 MHz of gain bandwidth product, 13 V/ms slew rate and fast settling time without the use of JFET device technology. Although this series can be operated from split supplies, it is particularly suited for single supply operation, since the common mode input voltage range includes ground potential (VEE). With a Darlington input stage, this series exhibits high input resistance, low input offset voltage and high gain. The all NPN output stage, characterized by no deadband crossover distortion and large output voltage swing, provides high capacitance drive capability, excellent phase and gain margins, low open loop high frequency output impedance and symmetrical source/sink AC frequency response.
The MC33071/72/74, MC34071/72/74, NCV33072/74,A series of devices are available in standard or prime performance (A Suffix) grades and are specified over the commercial, industrial/vehicular or military temperature ranges. The complete series of single, dual and quad operational amplifiers are available in plastic SOIC, QFN and TSSOP surface mount packages.
Features
• Wide Bandwidth: 4.5 MHz • High Slew Rate: 13 V/ms • Fast Settling Time: 1.1 ms to 0.1% • Wide Single Supply Operation: 3.0 V to 44 V • Wide Input Common Mode Voltage Range: Includes Ground (VEE) • Low Input Offset Voltage: 3.0 mV Maximum (A Suffix) • Large Output Voltage Swing: −14.7 V to +14 V (with ±15 V
Supplies)
• Large Capacitance Drive Capability: 0 pF to 10,000 pF • Low Total Harmonic Distortion: 0.02% • Excellent Phase Margin: 60° • Excellent Gain Margin: 12 dB • Output Short Circuit Protection • ESD Diodes/Clamps Provide Input Protection for Dual and Quad • NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
DATA SHEET www.onsemi.com
8 1
SOIC−8 D SUFFIX CASE 751
WQFN10 MT SUFFIX CASE 510AJ
14 1
SOIC−14 D SUFFIX CASE 751A
14 1
TSSOP−14 DTB SUFFIX CASE 948G
ORDERING INFORMATION
See detailed ordering and shipping information on page 18 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking section on page 19 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
October, 2021 − Rev. 24
Publication Order Number: MC34071/D
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
CASE 751
Offset Null 1
8 NC
Inputs
23+
VEE 4
7 VCC 6 Output 5 Offset Null
(Single, Top View)
Output 1 1
2-
Inputs 1 + 3 VEE 4
8 VCC 7 Output 2
-6 +
Inputs 2
5
(Dual, Top View)
PIN CONNECTIONS CASE 751A/CASE 948G
Output 1 1
2
Inputs 1
-1 +
3
VCC 4
Inputs 2
5 6
+ -
2
Output 2 7
14 Output 4
4
13 -
+ 12
Inputs 4
11 VEE
3 + 10 -9
Inputs 3
8 Output 3
(Quad, Top View)
Output 1 NC
In 1 In + 1
CASE 510AJ
VCC
10
1
9
2
8
3
7
4
6
5
VEE/GND (Top View)
Output 2 NC In 2 In + 2
Q3 Q1
Q2
Bias
-
Q8
Inputs +
Q4
R1 C1
R2
Q9
Q10
Base Current Cancellation
Q13 Q12 D1
R3
R4
VCC
Q5
Q6 Q7
Q11 Q14
Q17
D2 C2
Q18 R6 R7
Output
R8
D3 Q19
Q15 Q16
Current
R5
Limit
Offset Null (MC33071, MC34071 only)
Figure 1. Representative Schematic Diagram (Each Amplifier)
VEE/GND
www.onsemi.com 2
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Supply Voltage (from VEE to VCC)
VS
+44
V
Input Differential Voltage Range
VIDR
(Note 1)
V
Input Voltage Range
VIR
(Note 1)
V
Output Short Circuit Duration (Note 2)
tSC
Indefinite
Sec
Operating Junction Temperature
TJ
+150
°C
Storage Temperature Range
Tstg
−60 to +150
°C
ESD Capability, Dual and Quad (Note 3) Human Body Model Machine Model
V
ESDHBM ESDMM
2000 200
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Either or both input voltages should not exceed the magnitude of VCC or VEE. 2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2). 3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (JEDEC standard: JESD22−A114) ESD Machine Model tested per AEC−Q100−003 (JEDEC standard: JESD22−A115)
www.onsemi.com 3
MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, RL = connected to ground, unless otherwise noted. See Note 4 for TA = Tlow to Thigh)
A Suffix
Non−Suffix
Characteristics
Sy.