MGA62563

Agilent MGA-62563 Current-Adjustable, Low Noise Amplifier Data Sheet www.DataSheet4U.com Features Single +3V or +5V supply High linearity Description Agilent’s MGA-62563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 3 GHz. Packaged in an miniature SOT-363 package, it requires half the board space of a SOT-143 package. One external resistor is used to set the bias current taken by the device over a wide range. This allows the designer to use the same part in several circuit positions and tailor the linearity performance (and current consumption) to suit each position. The MGA-62563 is normally operating with Id set in the 2080mA range The output of the amplifier is matched to 50Ω (below 2:1 VSWR) across the entire bandwidth and only requires minimum input matching. The amplifier allows a wide dynamic range by offering a 0.9 dB NF coupled with a +32.9 dBm Output IP3. The circuit uses state-of-the-art E-pHEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3 V or +5V power supply. Pin Connections and Package Marking Low noise figure Miniature package Lead-free option available Specifications at 500 MHz; 3V, 60 mA (Typ.) 0.9 dB noise figure GND 1 GND 2 INPUT 3 MGA-86563 Pkg OUTPUT 6 and V d 5 GND 4 BIAS 32.9 dBm OIP3 22 dB gain 17.8 dBm P1dB Note: Package marking provides orientation and identification: “62” = Device Code “x” = Da...