MX25L1605A

ADVANCED INFORMATION MX25L1605A 16M-BIT [x 1] CMOS SERIAL FLASH FEATURES GENERAL Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3 16,777,216 x 1 bit structure 512 Equal Sectors with 4K byte each - Any Sector can be erased individually 32 Equal Blocks with 64K byte each - Any Block can be erased individually Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE High Performance - Fast access time: 70MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load) - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page) - Fast erase time: 90ms(typ.) and 270ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 3s(max.)/block (64Kbyte per block) Low Power Consumption - Low active read current: 12mA(max.) at 70MHz, 8mA(max.) at 66MHz and 4mA(max.) at 33MHz - Low active programming current: 30mA (max.) - Low active erase current: 15mA (max.) - Low standby current: 50uA (max.) - Deep power-down mode 10uA (typical) Minimum 100,000 erase/program cycles SOFTWARE FEATURES Input Data Format - 1-byte Command code Block Lock protection - The BP0~BP2 status bit defines the size of the area to be software protected against Program and Erase instructions. Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies...