NCV8665

NCV8665 Linear Regulator - Low Dropout, Very Low Iq, Reset, Delay Reset 150 mA The NCV8665 is a precision 5.0 V fixed output, low dropout integrated voltage regulator with an output current capability of 150 mA. Careful management of light load current consumption, combined with a low leakage process, achieve a typical quiescent ground current of 30 mA. NCV8665 is pin for pin compatible with the NCV8675 and the NCV4275 and it could replace this part when lower output current, and very low quiescent current is required. The output voltage is accurate within ±2.0%, and maximum dropout voltage is 600 mV at full rated load current. It is internally protected against 45 V input transients, input supply reversal, output overcurrent faults, and excess die temperature. No external components are required to enable these features. Features 5 V Fixed Output (3.3 V and 2.5 V Versions are Also Available) ±2.0% Output Accuracy, Over Full Temperature Range 40 mA Maximum Quiescent Current at IOUT = 100 mA 600 mV Maximum Dropout Voltage at 150 mA Load Current Wide Input Voltage Operating Range of 5.5 V to 45 V Internal Fault Protection ♦ −42 V Reverse Voltage ♦ Short Circuit ♦ Thermal Overload NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes These are Pb−Free Devices VIN Bandgap Reference Error Amplifier + − Current Limit and Saturation Sense VOUT http://onsemi.com MARKING DIAGRAMS 1 5 D2PAK 5−PIN DS SUFFIX CASE 936A V665−50G AWLY...