IS62C51216AL

IS62C51216AL IS65C51216AL 512K x 16 LOW VOLTAGE, ULTRA LOW POWER CMOS STATIC RAM DECEMBER 2010 FEATURES DESCRIPTION High-speed access time: 45ns, 55ns CMOS low power operation – 36 mW (typical) operating – 12 µW (typical) CMOS standby TTL compatible interface levels Single power supply – 4.5V--5.5V Vdd Fully static operation: no clock or refresh required Three state outputs Data control for upper and lower bytes Automotive temperature (-40oC to +125oC) Lead-free available The ISSI IS62C51216AL and IS65C51216AL are high- speed, 8M bit static RAMs organized as 512K words by 16 bits. It is fabricated using ISSI's high-performance CMOS technology. This highly reliable process coupled with innovative circuit design techniques, yields high-performance and low power consumption devices. When CS1 is HIGH (deselected) or when CS2 is low (deselected) or when CS1 is low, CS2 is high and both LB and UB are HIGH, the device assumes a standby mode at which the power dissipation can be reduced down with CMOS input levels. Easy memory expansion is provided by using Chip Enable and Output Enable inputs.The active LOWWrite Enable (WE) controls both writing and reading of the memory. A data byte allows Upper Byte (UB) and Lower Byte (LB) access. The IS62C51216AL and IS65C51216AL are packaged in the JEDEC standard 48-pin mini BGA (9mm x 11mm) and 44-Pin TSOP (TYPE II). FUNCTIONAL BLOCK DIAGRAM A0-A18 DECODER 512K x 16 MEMORY ARRAY VDD GND I/O0-I/O7 Lo...