LED Shunt
LED Shunt
NUD4700
The NUD4700 is an electronic shunt which provides a current bypass in the case of a single LED going i...
Description
LED Shunt
NUD4700
The NUD4700 is an electronic shunt which provides a current bypass in the case of a single LED going into open circuit. LEDs are by nature quite fragile when subjected to transients and surge conditions. There are also many cases where high reliability of the LED lighting must be maintained such as headlights, lighthouses, bridges, aircraft, runways and so forth. In these cases the low cost addition of the NUD4700 will provide full assurance that an entire string of LEDs will not extinguish should one LED fail. NUD4700 is also applicable to other loads where circuit continuity is required. This device is designed to be used with 1 W LEDs (nominally 350 mA @ 3 V).
Features
A Simple Two Terminal Device Automatically Resets Itself if the LED Heals Itself or is Replaced ON−State Voltage Typically 1 V OFF−State Current less than 250 mA Available with White Package SZ Prefix (black package only) for Automotive and Other
Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
LEDs where Preventive Maintenance is Non Practical LED Headlights LEDs with High Reliability Requirements Crowbar Protection for Open Circuit Conditions Overvoltage Protection for Sensitive Circuits
DATA SHEET www.onsemi.com
Anode
Cathode
POWERMITE[ CASE 457
MARKING DIAGRAM
Anode
M MNHG
Cathode
M = Date Code MNH = Device C...
Similar Datasheet