High frequency through hole OCXO Sine wave
OCO-M25BS
High frequency through hole OCXO Sine wave
Features
Applications: instrumentation, communications, inf...
Description
OCO-M25BS
High frequency through hole OCXO Sine wave
Features
Applications: instrumentation, communications, infrastructure High frequency: up to 500 MHz Short warm-up time: < 60 s Low phase noise floor of < -167 dBc/Hz
Parameter
Frequency range Standard frequency Frequency stability vs. operating temperature range vs. supply voltage change vs. load change vs. aging after 30 days of operation Output waveform Output load Supply voltage Peak current consumption during warm-up time Steady-state current consumption Warm-up time Frequency pulling range Vcontrol (Vc) via external voltage Vcontrol (Vc) via external potentiometer Reference voltage output (Vref) Phase noise @ 100 MHz carrier frequency
Specification
48.00 ~ 500.00 MHz 100.000 MHz ±1 x 10-7 over -40 ~ +70 °C ±7.5 x 10-8 over -20 ~ +70 °C ±10 % ±2 x 10-8 -8 ±10 % ±1 x 10 1st year ±3 x 10-7 sine wave > 400 mV (rms) 50 10 % +12 V 5 % < 300 mA @ +25 °C < 100 mA @ +25 °C < 60 s < 2 x 10-7 @ +25 °C > ±3 ppm positive slope 0 ~ +10 V 20 kΩ +10 V -95 dBc/Hz @ 10 Hz -125 dBc/Hz @ 100 Hz -150 dBc/Hz @ 1 kHz -165 dBc/Hz @ 10 kHz < -25 dBc -20 ~ +70 °C or -40 ~ +70 °C -55 ~ +85 °C
Harmonics Operating temperature range Storage temperature range Optional available with SMA connectors Environmental test
vibration shock
acceleration: 10 g; 10 Hz up to 500 Hz and down to 10 Hz; all 3 axes, 4.5 h/axis 100 g, half-sine, 3 ms (3 shocks each, 6 directions)
Pin function
#1 #2 #3 #4 #5 RF output GND Vc Vref Vdc
Cir...
Similar Datasheet