APTC60TAM24TPG

APTC60TAM24TPG Triple phase leg Super Junction MOSFET Power Module VDSS = 600V RDSon = 24mΩ max @ Tj = 25°C ID = 95A @ Tc = 25°C Application Welding converters Switched Mode Power Supplies Uninterruptible Power Supplies Motor control Features - Ultra low RDSon - Low Miller capacitance - Ultra low gate charge - Avalanche energy rated - Very rugged Kelvin source for easy drive Very low stray inductance - Symmetrical design - Lead frames for power connections High level of integration Internal thermistor for temperature monitoring These Devices are sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1–6 APTC60TAM24TPG – Rev 0 Benefits Outstanding performance at high frequency operation VBUS 1 VBUS 2 VBUS 3 Direct mounting to heatsink (isolated package) G1 G3 G5 Low junction to case thermal resistance S1 S3 S5 0/VBUS 2 0/VBUS 3 0/VBUS 1 Solderable terminals both for power and signal for S6 S4 S2 easy PCB mounting G6 G4 G2 Very low (12mm) profile Each leg can be easily paralleled to achieve a phase U V W leg of three times the current capability Module can be configured as a three phase bridge Module can be configured as a boost followed by a full bridge RoHS Compliant Absolute maximum ratings Symbol Parameter Max ratings Unit VDSS Drain - Source Breakdown Voltage 600 V Tc = 25°C 95 ID Continuous Drain Current A Tc = 80°C 70 IDM Pulsed Drai...