RF Filter 100 KHz to 5.8 GHz SMT package
RF Filter 100 KHz to 5.8 GHz SMT package
The content of this specification may change without notification 09/18/08
Wid...
Description
RF Filter 100 KHz to 5.8 GHz SMT package
The content of this specification may change without notification 09/18/08
Wide Band RF Eliminate Filter
KHLC-04d
Feature ⋅ SMT Package in Thin Thickness ⋅ Broad Bandwidth: 100 kHz to 5.8 GHz (-20 dB) ⋅ Comply with Large Current (1.5 A)
Getting along with high speed orientation of commercial electronic apparatus, high harmonic wave (noise) delivered to the DC power supply extends the frequency from several GHz to several GHz times by ten. Under such a high frequency orientation at rapid constant progress, the circuit method like using a bypass capacitor cannot remove actually high harmonic wave which is transmitted to the power supplies. In order to perform high speed transmission of a digital signal, the power filter KHLC-04d should be put in series to the bias (power supply terminal) of the electric device (ICs and etc) and needs to cut high harmonic wave signal which is leaked in the power supply line. KHLC-04d has an usable frequency range of 100 kHz to 5.8 GHz (-20 dB), which has RF preventive band characteristics in the wide range and is very ideal for mounting position electrically as this power filter in SMT package can be mounted near the power supply terminals of ICs and etc.
Isolation vs Frequency
0 -10 -20 -30 -40 -50 -60 -70 1M
Frequency [ Hz ]
10G
Absolute Maximum Rating
Parameter Rated Current Rated Voltage Soldering Temperature Operating Temperature Storage Temperature Value (max.) 1,500 25 +265 (10 sec) −40 ~ +85 ...
Similar Datasheet