DatasheetsPDF.com

PWB4809MD-1W5 Dataheets PDF



Part Number PWB4809MD-1W5
Manufacturers MORNSUN
Logo MORNSUN
Description DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER
Datasheet PWB4809MD-1W5 DatasheetPWB4809MD-1W5 Datasheet (PDF)

PWA_(M)D-1W5&PWB_(M)D-1W5 Series 1.5W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER multi-country patent protection RoHS FEATURES Wide input voltage(4:1) Operating Temperature: -40°C to +85°C 1500VDC Input/Output Isolation Short Circuit Protection(automatic recovery) Internal SMD construction No external component required No Heat Sink Required Industry Standard Pinout Five-sided shielding package(PWA/B_MD) MTBF>1,000,000 hours RoHS Compliance PRODUCT PROGRAM Input Pa.

  PWB4809MD-1W5   PWB4809MD-1W5



Document
PWA_(M)D-1W5&PWB_(M)D-1W5 Series 1.5W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DIP DC-DC CONVERTER multi-country patent protection RoHS FEATURES Wide input voltage(4:1) Operating Temperature: -40°C to +85°C 1500VDC Input/Output Isolation Short Circuit Protection(automatic recovery) Internal SMD construction No external component required No Heat Sink Required Industry Standard Pinout Five-sided shielding package(PWA/B_MD) MTBF>1,000,000 hours RoHS Compliance PRODUCT PROGRAM Input Part Number PWA2405(M)D-1W5 PWA2412(M)D-1W5 PWA2415(M)D-1W5 PWB2403(M)D-1W5 PWB2405(M)D-1W5 PWB2409(M)D-1W5 PWB2412(M)D-1W5 PWB2415(M)D-1W5 24 9.0-36 40 16 Voltage (VDC) Nominal Range No-load Voltage Max* (mA)(typ) (VDC) ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 48 18-72 80 8 3.3 5 9 12 15 Output Current (mA) Max ±150 ±63 ±50 500 300 167 125 100 ±150 ±63 ±50 500 300 167 125 100 Min ±15 ±6 ±5 50 30 17 12 10 ±15 ±6 ±5 50 30 17 12 10 74 78 79 72 74 76 78 80 74 78 80 72 74 76 78 80 Efficiency (%,typ.) APPLICATIONS The PWA_(M)D-1W5&PWB_(M)D-1W5 Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (voltage range≤ 4:1); 2) Where isolation is necessary between input and output (Isolation Voltage≤ 1500VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. PWA4805(M)D-1W5 PWA4812(M)D-1W5 PWA4815(M)D-1W5 PWB4803(M)D-1W5 PWB4805(M)D-1W5 PWB4809(M)D-1W5 PWB4812(M)D-1W5 PWB4815(M)D-1W5 * Input voltage over it may cause permanent damage to the device. Note: The load shouldn't be less than 10%, otherwise ripple will increase dramatically. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. MODEL SELECTION OUTPUT SPECIFICATIONS Item Test Conditions See below products program Refer to recommended circuit Min 0.15 ±1 ±3 ±0.5 ±0.2 Typ Max 1.5 ±3 ±5 ±2* ±0.75 ±0.03 20 50 300 50 100 KHz %/°C mVp-p % Units W PWA2412D-1W5 Rated Power Package Style Output Voltage Input Voltage Produ ct Se rie s Output Power Positive Voltage accuracy Negative Voltage accuracy Refer to recommended circuit Load Regulation Line Regulation Temperature Drift Ripple** From 10% to 100% load Input voltage from low to high Refer to recommended circuit 20MHz bandwidth 20MHz bandwidth 100% load, nominal input voltage MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 Http://www.mornsun-power.com Noise** Switching Frequency * Dual output models unbalanced load: ±5%. **Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input .


PWB4805MD-1W5 PWB4809MD-1W5 PWB4812MD-1W5


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)