STL-S3

Stratum 3 Timing Module STL-S3 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Features 6 Input References Hitless Switch Over CMOS output up to 77.76 MHz 8 kHz Output Fast Acquisition Mode Manual/ Autonomous Operation Master/Slave Configuration Revertive/Nonrevertive Modes Application The Connor-Winfield Stratum 3 Simplified Control Timing Module acts as a complete system clock module for Stratum 3 timing applications in accordance with GR-1244CORE, Issue 2, GR-253-CORE, Issue 3, and ITU-T G.812, Option ΙΙΙ. Connor-Winfield’s Stratum 3 Timing module helps reduce the cost of your design by minimizing your development time and maximizing your control of the system clock with our simplified design. www.DataSheet4U.com Bulletin Page Revision Date Issued By TM055 1 of 24 P00 17 MAY 04 MBATTS General Connor-Winfield's STL timing module provides Stratum 3 synchronization for a complete system clock solution in a single module in accordance with GR-1244-CORE Issue 2, GR253-CORE Issue 3, and ITU-T G.812 Option III. The STL provides a reliable network element clock reference to line cards used in TDM, PDH, SONET, and SDH application environments. Typical applications include digital cross connects, DSLAMs, ADMs, multiservice platforms, switches and routers. The STL meets 0.37 ppm Hold Over requirements over 0° - 70°C temperature range. The 3.3V power requirement will draw a maximum of 1.3 A during an initia...