Document
Features
lSUBMINIATURE PACKAGE. lWIDE VIEWING ANGLE. lZ-BEND LEAD. lLONG LIFE - SOLID STATE RELIABILITY. lLOW PACKAGE PROFILE. lPACKAGE : 1000PCS / REEL.
Package Dimensions
SUBMINIATURE SOLID STATE LAMP
AM2520SRD09
SUPER BRIGHT RED
Description
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice.
SPEC NO:DSAA9836 APPROVED: J.LU
REV NO: V.2 CHECKED: Allen Liu
DATE: MAR/27/2003 DRAWN: Z.Y.YANG
PAGE: 1 OF 4
Selection Guide
Part No.
Dice
AM2520SRD09
SUPER BRIGHT RED (GaAlAs)
Lens Type RED DIFFUSED
Iv (mcd) @ 20 mA
Min .
Ty p .
50
150
View in g Angle 2θ1/2 40°
Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak λD
∆λ1/2 C
Peak Wavelength Super Bright Red
Dominate Wavelength Super Bright Red
Spectral Line Half-width Super Bright Red
Capacitance
Super Bright Red
VF
Forward Voltage Super Bright Red
IR
Reverse Current Super Bright Red
Ty p . 660 640 20 45 1.85
Max.
2.5 10
Units nm nm nm pF V uA
Test Conditions IF=2 0 mA IF=2 0 mA IF=2 0 mA
VF=0V;f=1MHz IF=2 0 mA VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Super Bright Red
100 30 155 5 -40°C To +85°C
SPEC NO:DSAA9836 APPROVED: J.LU
REV NO: V.2 CHECKED: Allen Liu
DATE: MAR/27/2003 DRAWN: Z.Y.YANG
Units mW mA mA
V
PAGE: 2 OF 4
Super Bright Red
AM2520SRD09
SPEC NO:DSAA9836 APPROVED: J.LU
REV NO: V.2 CHECKED: Allen Liu
DATE: MAR/27/2003 DRAWN: Z.Y.YANG
PAGE: 3 OF 4
AM2520SRD09 SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process.
Recommended Soldering Pattern (Units : mm)
Tape Specifications (Units : mm)
SPEC NO:DSAA9836 APPROVED: J.LU
REV NO: V.2 CHECKED: Allen Liu
DATE: MAR/27/2003 DRAWN: Z.Y.YANG
PAGE: 4 OF 4
.