RF AMPLIFIER
RF AMPLIFIER MODEL TM3088
Features
! Higher Output Power: +22.5 dBm Typical ! Low Noise Figure: 2.8 dB Typical ! Operati...
Description
RF AMPLIFIER MODEL TM3088
Features
! Higher Output Power: +22.5 dBm Typical ! Low Noise Figure: 2.8 dB Typical ! Operating Temp. - 55 ºC to +85 ºC
Available as:
TM3088, 4 Pin TO-8 (T4) TN3088, 4 Pin Surface Mount (SM3) FP3088, 4 Pin Flatpack (FP4) BX3088, Connectorized Housing (H1)
Typical Intermodulation Performance at 25 º C
Second Order Harmonic Intercept Point ...... +50 dBm (Typ.) Second Order Two Tone Intercept Point ....... +45 dBm (Typ.) Third Order Two Tone Intercept Point ........... +36 dBm (Typ.)
Specifications
CHARACTERISTIC Frequency Gain (dB) Power @ 1 dB Comp. (dBm) Reverse Isolation (dB) In Out Noise Figure (dB) Power Vdc mA VSWR TYPICAL Ta= 25 ºC 10 -1500 MHz 14.0 +22.5 -20 <1.5:1 <1.5:1 2.8 +15 95 MIN/MAX Ta = -55 ºC to +85 ºC 10 - 1500 MHz 13.0 Min. +21.5 Min. -18 Max. 2.0:1 Max. 2.0:1 Max. 4.0 Max. +15 Min. 105 Max.
Maximum Ratings
Ambient Operating Temperature .............. -55ºC to + 100 ºC Storage Temperature ............................... -62ºC to + 125 ºC Case Temperature ................................................. + 125 ºC DC Voltage ......................................................... + 18 Volts Continuous RF Input Power ................................. + 13 dBm Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.) Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
Note: Care should always be taken to effectively ground the case of each unit.
Typical Performance Data
Gain (dB)
16 15 14 13 12
Start 10 MHz St...
Similar Datasheet