MAX3108

19-5723; Rev 1; 2/11 SPI/I2C UART with 128-Word FIFOs in WLP General Description The MAX3108 small form factor universal asynchronous receiver-transmitter (UART) with 128 words each of receive and transmit FIFOs is controlled through a serial I2C or SPI™ controller interface. Auto-sleep and shutdown modes help reduce power consumption during periods of inactivity. A low 500FA (max) supply current and tiny 25-bump WLP (2.1mm x 2.1mm) package make the MAX3108 ideal for low-power portable devices. The MAX3108 operates from a supply voltage of 1.71V to 3.6V. Baud rates up to 24Mbps make the MAX3108 suitable for today’s high data rate applications. A phase-locked loop (PLL), predivider, and fractional baud-rate generator allow high-resolution baud-rate programming and minimize the dependency of baud rate on reference clock frequency. Four GPIOs can be used as inputs, outputs, or interrupt inputs. When configured as outputs, they can be programmed to be open-drain outputs and sink up to 20mA of current. The MAX3108 is ideal for portable and handheld devices, is available in a 25-bump (2.1mm x 2.1mm) 0.4mm pitch WLP package, and is specified over the -40NC to +85NC extended temperature range. S 24Mbps (max) Baud Rate S Integrated PLL and Divider S 1.71V to 3.6V Supply Range S High-Resolution Programmable Baud Rate S SPI Up to 26MHz Clock Rate S Fast Mode Plus I2C Up to 1MHz S Automatic RTS and CTS Hardware Flow Control S Automatic XON/XOFF Software Flow Control S Special C...