CA-MLF32A-A-Z-T-01

30.48mm [1.200"] 31 25 32 26 1 2 24 23 30.48mm [1.200"] 7 8 18 17 Top View 10 16 2.54mm [0.100"] 9 15 10.36mm [0.408"] Side View SK-UGA6/33A-03 SF-MLF32A-A-02 www.DataSheet4U.com 32 position MLF ZIF socket to 32 position surface mountable MLF emulator foot with test probes. Description: Carrier Adaptor Pin assignment/ interconnect 1:1. Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice. CA-MLF32A-A-Z-T-01 Drawing © 2004 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: H. Hansen File: CA-MLF32A-A-Z-T-01 Dwg Scale: 3:1 Rev: B Date: 4/5/04 Modified: 9/26/05 Recommended torque = 1.5 in. lbs. (24 in. oz.) 3 22.31mm [0.878"] 1 board UGA SK-UGA6/33A-03 SF-MLF32A-A-02 2 1 1 2 Substrate: 2.34mm ±0.18mm [0.092" ±0.007"] FR4/G10 or equivalent high temp material. 17µm [1/2 oz.] Cu clad. SnPb plating. Pins: material- Brass Alloy 360 1/2 hard; finish0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.). Test points: material- Phosphor Bronze; platingSn over 1.27µm [50µ"] Ni. Gold flash on contact end. 2 3 Apply torque and then plug into SF-MLF foot. NOTE: Do not apply torque when assemby is pluged into SF-MLF foot. User Instructions: 1. Attach SF-ML...