LRC30

RoHS LRC30 0.177±0.012 (4.50±0.30) 0.126±0.008 (3.20±0.20) 0.142±0.008 (3.61±0.20) 0.126±0.008 (3.20±0.20) Low Resistance Chip Inductors 0.102±0.008 (2.59±0.20) Dimensions: Inches (mm) 0.177±0.012 (4.50±0.30) 0.098 (2.49) 0.118 (3.00) 0.059 (1.50) 0.059 (1.50) 0.059 (1.50) Features Miniature SMT wire-wound open magnetic path construction inductors with low DCR, high current capacity and high impedance characteristics. Excellent solder heat resistance for flow and reflow soldering methods. Excellent for use as choke coils in DC/DC converter and DC power supply circuits. Electrical Inductance Range: 1.0 µ h to 470µh Tolerance: For 20% use M, 10% use K and 5% use J as part number suffix. Test Frequency: Inductance measured at 1MHz for all values. Except 560µh thru 1500µh, which are tested at 1 KHz. Operating Temp. Range: i-25° to +85 Rated Current: Based on Temperature rise not to exceed 35ºC. Inductance Drop 10% typical. Resistance to Soldering Heat: Pre heat: 150ºC ± 10ºC / 1-2 min. Solder temp: www.DataSheet4U.com 260ºC ± 5ºC for 10 sec. ± 1 sec. Physical Packaging: 500 pieces per 7 inch reel. 2500 pieces per 13 inch reel. ll Allied Part Number LRC30-1R0M-RC LRC30-1R5M-RC LRC30-2R2M-RC LRC30-3R3M-RC LRC30-4R7M-RC LRC30-6R8M-RC LRC30-100K-RC LRC30-150K-RC LRC30-220K-RC LRC30-330K-RC LRC30-470K-RC LRC30-680K-RC LRC30-101K-RC LRC30-151K-RC LRC30-221K-RC LRC30-331K-RC LRC30-471K-RC LRC30-561K-RC LRC30-681K-RC LRC30-102K-RC LRC30-152K-RC Inductance (µh) Tolerance (...