Power Chip Inductors
RoHS
Power Chip Inductors
Dimensions: Inches (mm)
PC03015
Allied Part Number
Inductance (µh)
Tolerance (%)
Test Fre...
Description
RoHS
Power Chip Inductors
Dimensions: Inches (mm)
PC03015
Allied Part Number
Inductance (µh)
Tolerance (%)
Test Freq. MHz, 1 V
DCR (Ω )
IDC (A)
Features Unshielded SMD low cost design Designed for higher current applications Accurate and consistent dimensions for auto insertion Excellent for use in DC-DC converter application Also available in magnetically shielded
PC03015-2R2M-RC PC03015-3R3M-RC PC03015-4R7M-RC PC03015-6R8M-RC PC03015-100M-RC PC03015-150M-RC PC03015-220M-RC PC03015-330M-RC PC03015-390M-RC PC03015-470M-RC PC03015-680M-RC PC03015-101M-RC PC03015-221M-RC PC03015-122M-RC PC03015-152M-RC
2.2 3.3 4.7 6.8 10 15 22 33 39 47 68 100 220 1200 1500
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0.10 0.11 0.15 0.20 0.30 0.58 0.71 1.10 1.30 1.30 2.20 3.50 10.92 38 55
0.79 0.73 0.65 0.77
Electrical 0.45 0.30 0.25 0.20 0.17 0.17 0.13 0.10 0.07 0.05 0.03 Test Equipment (L & Q): HP4192A Impedence Analyzer (DCR): Chen Hwa 502BC (IDC): HP4284A with HP42841A or CH1061 with CH301A Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Inductance Range: 2.2µh to 1500µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: (L/Q) as specified Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower.
All specifications subject to change wit...
Similar Datasheet