Power Chip Inductors
RoHS
PCI60
Power Chip Inductors
Dimensions: Inches (mm)
0.730 Max (18.54) 0.500 (12.70) 0.100 (2.54) 0.600 (15.24) Ma...
Description
RoHS
PCI60
Power Chip Inductors
Dimensions: Inches (mm)
0.730 Max (18.54) 0.500 (12.70) 0.100 (2.54) 0.600 (15.24) Max
1st 2nd 3rd
0.280 Max (7.11)
0.110 (2.79)
0.100 (2.54)
0.118 (3.00)
0.490 (12.45) * Notice of marking change see “Marking” below.
Features High saturation current rating up to 20 Amps Very low DCR for low power loss Designed with high heat resistant materials for reflow operation Wrap around terminals for excellent solder quality and inspection Flat top for pick and place assembly Non standard values available
Allied Part Number
Inductance (µh)
Tolerance (%)
SRF (MHz) TYP
DCR Max. (Ω )
Isat (A)
Irms (A)
PCI60-1R0M-RC PCI60-2R2M-RC PCI60-3R3M-RC PCI60-5R6M-RC PCI60-100M-RC PCI60-150M-RC Electrical
1.0 2.2 3.3 5.6 10 15 22 33 47 68 100 150 220 330 470 680 1000
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
80 80 60 40 30 22 20 15 9 8 7 6 5 4 3 2.5 2.0
.011 .014 .016 .022 .032 .036 .047 .066 .087 .13 .19 .25 .38 .56 .85 1.20 1.80
20 16 14 12 10 8.0 7.0 5.5 4.5 3.5 3.0 2.6 2.4 1.9 1.4 1.2 1.0
8.6 7.1 6.2 5.3 4.3 4.0 3.5 3.0 2.6 2.3 1.8 1.5 1.2 1.0 0.82 0.72 0.56
Inductance Range: 4.7µh to 1000µh. Tolerance: ± 20% over the entire inductance range. Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push Operating Temp. Range: i-40° to + 85ºC Inductance Drop: 20% typical at the rated Isat.0 to 2000) x 10 -6° C. Temperature Rise: ∆T=40ºC rise typical at Irms.
Physical
PCI60-220M-RC PCI60-330M-RC PCI60-4...
Similar Datasheet