DatasheetsPDF.com

B-13-15-622-TPM-SXX-60 Dataheets PDF



Part Number B-13-15-622-TPM-SXX-60
Manufacturers Source Photonics
Logo Source Photonics
Description 622 Mbps Bi-directional Single Fiber Transceiver
Datasheet B-13-15-622-TPM-SXX-60 DatasheetB-13-15-622-TPM-SXX-60 Datasheet (PDF)

622 Mbps Bi-directional Single Fiber Transceiver B-13/15-622-TPM(3)-Sxx-60 Features • Coaxial Single Mode Single Fiber Package with Optional SC/FC/ST Connector • Wavelength Tx 1310 nm/Rx 1550 nm • SONET OC-12 SDH STM-4 (S-4.1) Compliant • Single +3.3V/+5V Power Supply • LVPECL/PECL Differential Inputs and Outputs • Wave Solderable and Aqueous Washable • Class 1 Laser Int. Safety Standard IEC 825 Compliant • Uncooled Laser Diode with MQW Structure • Complies with Telcordia (Bellcore) GR-468-CORE.

  B-13-15-622-TPM-SXX-60   B-13-15-622-TPM-SXX-60



Document
622 Mbps Bi-directional Single Fiber Transceiver B-13/15-622-TPM(3)-Sxx-60 Features • Coaxial Single Mode Single Fiber Package with Optional SC/FC/ST Connector • Wavelength Tx 1310 nm/Rx 1550 nm • SONET OC-12 SDH STM-4 (S-4.1) Compliant • Single +3.3V/+5V Power Supply • LVPECL/PECL Differential Inputs and Outputs • Wave Solderable and Aqueous Washable • Class 1 Laser Int. Safety Standard IEC 825 Compliant • Uncooled Laser Diode with MQW Structure • Complies with Telcordia (Bellcore) GR-468-CORE • Temperature Range: 0 to 70 ºC • Optical Isolation > 30 dB • Cross Talk < -33 dB • Optical Return Loss >14 dB • RoHS compliance available Absolute Maximum Rating Parameter Power Supply Voltage (3.3V) Power Supply Voltage (5V) Output Current Soldering Temperature Operating Temperature Storage Temperature Recommended Operating Condition Parameter Power Supply Voltage (3.3V) Power Supply Voltage (5V) Operating Temperature Data Rate Symbol Vcc Vcc Topr Min. 3.1 4.75 0 Typ. 3.3 5 622 Max. 3.5 5.25 70 Unit V V ºC Mbps Symbol Vcc Vcc Iout Topr Tstg Min. 0 0 0 0 -40 Max. 3.6 6 30 260 70 85 Unit V V mA ºC ºC ºC 10 seconds on leads only Note B-13/15-622-TPM3-Sxx-60 B-13/15-622-TPM-Sxx-60 Transmitter Specifications Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Po λ ∆λ ER tr tf 8.2 30 14 RIN TJ -15 1260 1310 -8 1360 2.5 1.2 1.2 -120 0.55 dBm nm nm dB ns ns dB dB dB/Hz ns Measured with 223-1 PRBS with 72 ones and 72 zeros. LUMNDS609-Mar0907 Rev A.1 10% to 90% Values 10% to 90% Values Tx: 1310 nm/ Rx: 1550 nm RMS(σ) Output power is coupled into a 9/125 µm single mode fiber Symbol Min Typical Max Unit Notes www.DataSheet4U.com Optical Rise Time Optical Isolation Optical Return Loss Relative Intensity Noise Total Jitter Optical Fall Time Compliant with Bellcore TR-NWT-000253 and ITU recommendation G957 LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 622 Mbps Bi-directional Single Fiber Transceiver B-13/15-622-TPM(3)-Sxx-60 Transmitter Specifications Parameter Electrical Power Supply Current Data Input Current-Low Data Input Current-High Differential Input Voltage Data Input Voltage-Low Data Input Voltage-High ICC IIL IIH VIH-VIL VIL-VCC VIH-VCC -350 300 -2.0 -1.1 140 350 -1.58 -0.74 mA µA µA mV V V These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs Maximum current is specified at Vcc= Maximum @ maximum temperature Symbol Min Typical Max Unit Notes Receiver Specifications Parameter Optical Sensitivity Maximum Input Power Signal Detect-Asserted Signal Detect-Deasserted Signal Detect-Hysteresis Cross Talk Wavelength of Operation Pin Pa Pd -3 -40 1480 3.0 -28 -28 -33 1600 dBm dBm dBm dBm dB dB nm Measured on transition: low to high Measured on transition: high to low Measured with 223-1 PRBS with 72 ones and 72 zeros. (ITU-T recommendation G.958) Symbol Min Typical Max Unit Notes Receiver Specifications Parameter Electrical Power Supply Current Data Output Voltage-Low Data Output Voltage-High Signal Detect Output Voltage-Low Signal Detect Output Voltage-High ICC VOL -Vcc VOH- Vcc VSDL-Vcc VSDH- Vcc -1.9 -1.1 -1.9 -1.1 100 -1.6 -0.8 -1.6 -0.8 mA V V V V These outputs are compatible with 10K, 10KH and 100KECL and PECL outputs. The current excludes the output load current Symbol Min Typical Max Unit Notes www.DataSheet4U.com LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS609-Mar0907 Rev A.1 622 Mbps Bi-directional Single Fiber Transceiver B-13/15-622-TPM(3)-Sxx-60 Connection Diagram 1. (Rx GND) 2. (Rx +) 3. (Rx-) 4. (SD) 5. (Rx Vcc) 6. (Tx Vcc) 7. (TD-) 8. (TD+) 9. (Tx GND) NC Top View NC Receiver Signal Ground Receiver Data Out Receiver Data Out Bar Signal Detect Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar Transmitter Data in Transmitter Signal Ground Warnings PIN 1 2 3 4 5 6 7 8 9 Symbol RxGND RD+ RDSD RxVcc TxVcc TDTD+ TxGND Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal DC power for the receiver section DC power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this pin to the transmitter ground plane www.DataSheet4U.com LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS609-Mar0907 Rev A.1 622 Mbps Bi-directional Single Fiber Transceiver B-13/15-622-TPM(3)-Sxx-60 Recommended Circuit Schematic Tx Vcc C5 Rx Vcc 9 8 R1 R3 7 6 5 4 3 2 1 R9 R5 R7 C6 TD + TD -.


B-13-15-155-T3-SSC4 B-13-15-622-TPM-SXX-60 B-13-15-622-TPM3-SXX-60


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)