L293B L293E
PUSH-PULL FOUR CHANNEL DRIVERS
. . . . . .
OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNE...
L293B L293E
PUSH-PULL FOUR CHANNEL DRIVERS
. . . . . .
OUTPUT CURRENT 1A PER CHANNEL PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive) INHIBIT FACILITY HIGH NOISE IMMUNITY SEPARATE LOGIC SUPPLY OVERTEMPERATURE PROTECTION
DIP16 ORDERING NUMBER : L293B
DESCRIPTION The L293B and L293E are quad push-pull drivers capableof delivering output currents to 1A per channel. Each channel is controlledby a TTL-compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four
transistors. A separate supply input is provided for the logic so that it may be run off a lower voltage to reduce dissipation. Additionally, the L293E has external connection of sensing resistors, for switchmode control. The L293Band L293E are package in 16 and 20-pin plastic DIPs respectively ; both use the four center pins to conduct heat to the printed circuit board. PIN CONNECTIONS
DIP16 - L293B
POWERDIP (16 + 2+ 2) ORDERING NUMBER : L293E
POWERDIP (16+2+2) - L293E
April 1993
1/12
L293B - L293E
BLOCK DIAGRAMS
DIP16 - L293B
POWERDIP (16+2+2) - L293E
2/12
L293B - L293E
SCHEMATIC DIAGRAM
(*) In the L293 these points are not externally available. They are internally connected to the ground (substrate). O Pins of L293 () Pins of L293E.
3/12
L293B - L293E
ABSOLUTE MAXIMUM RATINGS
Symbol Vs Vss Vi Vinh Iout Ptot Tstg, Tj Parameter Supply Voltage Logic Supply Voltage Input Voltage Inhibit Voltage Peak Output Current (non repetitive t = 5ms) o Total...