DatasheetsPDF.com

MK51N512CMD100 Dataheets PDF



Part Number MK51N512CMD100
Manufacturers Freescale Semiconductor
Logo Freescale Semiconductor
Description Up to 100 MHz ARM Cortex-M4 core
Datasheet MK51N512CMD100 DatasheetMK51N512CMD100 Datasheet (PDF)

Freescale Semiconductor Data Sheet: Product Preview Document Number: K51P144M100SF2 Rev. 4, 3/2011 Supports the following: MK51N256CLQ100, MK51N256CMD100, MK51N512CLQ100, MK51N512CMD100 K51 Sub-Family Data Sheet K51P144M100SF2 Features • Operating Characteristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 to 3.6 V – Temperature range (ambient): -40 to 85°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Me.

  MK51N512CMD100   MK51N512CMD100



Document
Freescale Semiconductor Data Sheet: Product Preview Document Number: K51P144M100SF2 Rev. 4, 3/2011 Supports the following: MK51N256CLQ100, MK51N256CMD100, MK51N512CLQ100, MK51N512CMD100 K51 Sub-Family Data Sheet K51P144M100SF2 Features • Operating Characteristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 to 3.6 V – Temperature range (ambient): -40 to 85°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Memories and memory interfaces – Up to 512 KB program flash memory on nonFlexMemory devices – Up to 128 KB RAM – Serial programming interface (EzPort) – FlexBus external bus interface • Clocks – 3 to 32 MHz crystal oscillator – 32 kHz crystal oscillator – Multi-purpose clock generator • System peripherals – 10 low-power modes to provide power optimization based on application requirements – Memory protection unit with multi-master protection – 16-channel DMA controller, supporting up to 64 request sources – External watchdog monitor – Software watchdog – Low-leakage wakeup unit www.DataSheet4U.com • Human-machine interface – Segment LCD controller supporting up to 40 frontplanes and 8 backplanes, or 44 frontplanes and 4 backplanes – Low-power hardware touch sensor interface (TSI) – General-purpose input/output • Analog modules – Two 16-bit SAR ADCs – Programmable gain amplifier (up to x64) integrated into each ADC – Two 12-bit DACs – Two operational amplifiers – Two transimpedance amplifiers – Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input – Voltage reference • Timers – Programmable delay block – Eight-channel motor control/general purpose/PWM timer – Two 2-channel quadrature decoder/general purpose timers – Periodic interrupt timers – 16-bit low-power timer – Carrier modulator transmitter – Real-time clock • Communication interfaces – USB full-/low-speed On-the-Go controller with onchip transceiver – Three SPI modules – Two I2C modules – Six UART modules – Secure Digital host controller (SDHC) – I2S module • Security and integrity modules – Hardware CRC module to support fast cyclic redundancy checks – 128-bit unique identification (ID) number per chip This document contains information on a product under development. Freescale reserves the right to change or discontinue this product without notice. © 2010–2011 Freescale Semiconductor, Inc. Preliminary Table of Contents 1 Ordering parts...........................................................................4 1.1 Determining valid orderable parts......................................4 2 Part identification......................................................................4 2.1 Description.........................................................................4 2.2 Format...............................................................................4 2.3 Fields.................................................................................4 2.4 Example.......


MK51N512CLQ100 MK51N512CMD100 MK51X256CLL100


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)