Document
Catalog 1308242 Issued 3-03
P&B
K10 series
15 Amp General Purpose Miniature Relay
File E22575 File LR15734
Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
Features
• K10 - DPDT contact arrangement standard. • AC and DC coils. • Mounting options include socket, PCB, top flange. • UL Class B coil insulation system.
Coil Data
DC Coils Nominal Voltage 6 12 24 48 110 120* 240* Resistance in Ohms ± 10% 40 160 650 2,600 11,000 ___ ___ Nominal Current in Milliamps 150 75 37 18.5 10 ___ ___ AC Coils Resistance in Ohms ± 15% 10.5 43 160 668 ___ 3,900 12,000 Nominal Current in Milliamps 200 100 52 26 ___ 11 6
Contact Data @ 25°C
Materials: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations minimum at rated loads.
*For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor in series with the 110VDC coil.
Contact Ratings
Contact Code 5 Material Silver-cadmium oxide UL/CSA Ratings 15A @ 30VDC 15A @ 120VAC 10A @ 277VAC 1/3HP @ 120VAC 1/2HP @ 250VAC Type Resistive Resistive Resistive
Operate Data @ 25°C
Must Operate Voltage: DC Coils: 75% of nominal voltage. AC Coils: 85% of nominal voltage. Operate Time (Excluding Bounce): 13 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal voltage.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms.
Environmental Data
Temperature Range: Storage: -60°C to +105°C. Operating: -45°C to +70°C.
Coil Data @ 25°C
www.DataSheet4U.com DC Coils: .9 Watts.
AC Coils: 1.2VA. Maximum Power: 2.0 Watts. Duty Cycle: Continuous. Insulation: Class B: (130°C).
Nominal Power:
Mechanical Data
Mounting: Socket mount, printed circuit board, top flange. Termination: .187" (4.75mm) quick connect/solder terminals, or printed circuit terminals. Enclosure: Smoke-color polycarbonate dust cover. Weight: 1.8 oz. (51g) approximately.
Dimensions are shown for
720 reference purposes only.
Dimensions are in inches over (millimeters) unless otherwise specified.
Specifications and availability subject to change.
www.tycoelectronics.com Technical support: Refer to inside back cover.
Catalog 1308242 Issued 3-03
P&B
Ordering Information
Typical Part No.
B
K10
P
-11
D
1
5
-6
1. Basic Series: K10 = 15 amp miniature relay. 2. Cover: P = Polycarbonate (smoke color). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 4. Coil Input: A = 50/60 Hz. AC D = DC 5. Mounting & Termination: 1 = Socket mount; .187" (4.75mm) quick connect/solder terminals. 5 = Printed circuit terminals; .160" length. T = Mounting bracket on end of cover; .187" (4.75mm) quick connect/solder terminals. 6. Contact Type: 5 = 15 amp silver-cadmium oxide 7. Co.