K10P81M100SF2 Datasheet: K10 Sub-Family





K10P81M100SF2 K10 Sub-Family Datasheet

Part Number K10P81M100SF2
Description K10 Sub-Family
Manufacture Freescale Semiconductor
Total Page 30 Pages
PDF Download Download K10P81M100SF2 Datasheet PDF

Features: Freescale Semiconductor Data Sheet: Prod uct Preview Document Number: K10P81M10 0SF2 Rev. 4, 3/2011 K10 Sub-Family Dat a Sheet Features • Operating Characte ristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 t o 3.6 V – Temperature range (ambient) : -40 to 105°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Memories and memory in terfaces – Up to 512 KB program flash memory on nonFlexMemory devices – Up to 128 KB RAM – Serial programming i nterface (EzPort) – FlexBus external bus interface • Clocks – 3 to 32 MH z crystal oscillator – 32 kHz crystal oscillator – Multi-purpose clock gen erator • System peripherals – 10 lo w-power modes to provide power optimiza tion based on application requirements – Memory protection unit with multi-m aster protection – 16-channel DMA con troller, supporting up to 64 request so urces – External watchdog monitor – Software watchdog – Low-leakage wakeup unit • Security and integri.

Keywords: K10P81M100SF2, datasheet, pdf, Freescale Semiconductor, K10, Sub-Family, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

Freescale Semiconductor
Data Sheet: Product Preview
Document Number: K10P81M100SF2
Rev. 4, 3/2011
K10 Sub-Family Data Sheet
Supports the following:
MK10N512VLK100, MK10N512VMB100
Features
Operating Characteristics
– Voltage range: 1.71 to 3.6 V
– Flash write voltage range: 1.71 to 3.6 V
– Temperature range (ambient): -40 to 105°C
Performance
– Up to 100 MHz ARM Cortex-M4 core with DSP
instructions delivering 1.25 Dhrystone MIPS per
MHz
Memories and memory interfaces
– Up to 512 KB program flash memory on non-
FlexMemory devices
– Up to 128 KB RAM
– Serial programming interface (EzPort)
– FlexBus external bus interface
Clocks
– 3 to 32 MHz crystal oscillator
– 32 kHz crystal oscillator
– Multi-purpose clock generator
System peripherals
– 10 low-power modes to provide power optimization
based on application requirements
– Memory protection unit with multi-master
protection
– 16-channel DMA controller, supporting up to 64
request sources
– External watchdog monitor
– Software watchdog
– Low-leakage wakeup unit
Security and integrity modules
– Hardware CRC module to support fast cyclic
redundancy checks
– 128-bit unique identification (ID) number per chip
www.DataSheet4U.com
K10P81M100SF2
Human-machine interface
– Low-power hardware touch sensor interface (TSI)
– General-purpose input/output
Analog modules
– Two 16-bit SAR ADCs
– Programmable gain amplifier (up to x64) integrated
into each ADC
– 12-bit DAC
– Three analog comparators (CMP) containing a 6-bit
DAC and programmable reference input
– Voltage reference
Timers
– Programmable delay block
– Eight-channel motor control/general purpose/PWM
timer
– Two 2-channel quadrature decoder/general purpose
timers
– Periodic interrupt timers
– 16-bit low-power timer
– Carrier modulator transmitter
– Real-time clock
Communication interfaces
– Two Controller Area Network (CAN) modules
– Two SPI modules
– Two I2C modules
– Four UART modules
– Secure Digital host controller (SDHC)
– I2S module
This document contains information on a product under development. Freescale
reserves the right to change or discontinue this product without notice.
© 2010–2011 Freescale Semiconductor, Inc.
Preliminary

                    
                    






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)