DatasheetsPDF.com

K10P81M100SF2 Dataheets PDF



Part Number K10P81M100SF2
Manufacturers Freescale Semiconductor
Logo Freescale Semiconductor
Description K10 Sub-Family
Datasheet K10P81M100SF2 DatasheetK10P81M100SF2 Datasheet (PDF)

Freescale Semiconductor Data Sheet: Product Preview Document Number: K10P81M100SF2 Rev. 4, 3/2011 K10 Sub-Family Data Sheet Features • Operating Characteristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 to 3.6 V – Temperature range (ambient): -40 to 105°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Memories and memory interfaces – Up to 512 KB program flash memory on nonFlexMemory devices – Up to 128 KB .

  K10P81M100SF2   K10P81M100SF2



Document
Freescale Semiconductor Data Sheet: Product Preview Document Number: K10P81M100SF2 Rev. 4, 3/2011 K10 Sub-Family Data Sheet Features • Operating Characteristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 to 3.6 V – Temperature range (ambient): -40 to 105°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Memories and memory interfaces – Up to 512 KB program flash memory on nonFlexMemory devices – Up to 128 KB RAM – Serial programming interface (EzPort) – FlexBus external bus interface • Clocks – 3 to 32 MHz crystal oscillator – 32 kHz crystal oscillator – Multi-purpose clock generator • System peripherals – 10 low-power modes to provide power optimization based on application requirements – Memory protection unit with multi-master protection – 16-channel DMA controller, supporting up to 64 request sources – External watchdog monitor – Software watchdog – Low-leakage wakeup unit • Security and integrity modules – Hardware CRC module to support fast cyclic redundancy checks – 128-bit unique identification (ID) number per chip www.DataSheet4U.com K10P81M100SF2 Supports the following: MK10N512VLK100, MK10N512VMB100 • Human-machine interface – Low-power hardware touch sensor interface (TSI) – General-purpose input/output • Analog modules – Two 16-bit SAR ADCs – Programmable gain amplifier (up to x64) integrated into each ADC – 12-bit DAC – Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input – Voltage reference • Timers – Programmable delay block – Eight-channel motor control/general purpose/PWM timer – Two 2-channel quadrature decoder/general purpose timers – Periodic interrupt timers – 16-bit low-power timer – Carrier modulator transmitter – Real-time clock • Communication interfaces – Two Controller Area Network (CAN) modules – Two SPI modules – Two I2C modules – Four UART modules – Secure Digital host controller (SDHC) – I2S module This document contains information on a product under development. Freescale reserves the right to change or discontinue this product without notice. © 2010–2011 Freescale Semiconductor, Inc. Preliminary Table of Contents 1 Ordering parts...........................................................................3 1.1 Determining valid orderable parts......................................3 2 Part identification......................................................................3 2.1 Description.........................................................................3 2.2 Format...............................................................................3 2.3 Fields.................................................................................3 2.4 Example............................................................................4 3 Terminology and guidelines......................................................4 3.1 Definition: Operating requirement......................................4 3.2.


K10P144M100SF2 K10P81M100SF2 K40P104M100SF2


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)