Control SCR. 40TPS08A Datasheet

40TPS08A SCR. Datasheet pdf. Equivalent

Part 40TPS08A
Description Phase Control SCR
Feature 40TPS...A/40TPS... High Voltage Series Vishay High Power Products Phase Control SCR, 35 A DESCRIPTI.
Manufacture Vishay Siliconix
Datasheet
Download 40TPS08A Datasheet



40TPS08A
40TPS...A/40TPS... High Voltage Series
Vishay High Power Products
Phase Control SCR, 35 A
2
(A)
TO-247AC
PRODUCT SUMMARY
VT at 40 A
ITSM
VRRM
1 (K) (G) 3
< 1.45 V
500 A
800/1200 V
DESCRIPTION/FEATURES
The 40TPS...A High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature. Low Igt parts available.
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
This product has been designed and qualified for industrial
level.
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
IT(AV)
Sinusoidal waveform
IRMS
VRRM/VDRM
ITSM
VT
dV/dt
40 A, TJ = 25 °C
dI/dt
TJ
VALUES
35
55
800/1200
500
1.45
1000
100
- 40 to 125
UNITS
A
V
A
V
V/µs
A/µs
°C
VOLTAGE RATINGS
PART NUMBER
40TPS08A
40TPS12A
40TPS08
40TPS12
www.DataSheet4U.com
VRRM/VDRM, MAXIMUM
REPETITIVE PEAK AND
OFF-STATE VOLTAGE
V
800
1200
800
1200
VRSM, MAXIMUM
NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
900
1300
900
1300
IRRM/IDRM
AT 125 °C
mA
10
Document Number: 93708
Revision: 12-Sep-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
1



40TPS08A
40TPS...A/40TPS... High Voltage Series
Vishay High Power Products Phase Control SCR, 35 A
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average on-state current
Maximum continuous RMS
on-state current as AC switch
IT(AV)
IT(RMS)
Maximum peak, one-cycle
non-repetitive surge current
ITSM
Maximum I2t for fusing
I2t
Maximum I2t for fusing
Low level value of threshold voltage
High level value of threshold voltage
Low level value of on-state slope resistance
High level value of on-state slope resistance
Maximum peak on-state voltage
Maximum rate of rise of turned-on current
Maximum holding current
Maximum latching current
I2t
VT(TO)1
VT(TO)2
rt1
rt2
VTM
dI/dt
IH
IL
Maximum reverse and direct leakage current
IRRM/IDRM
Maximum rate of rise of off-state voltage 40TPS08
Maximum rate of rise of off-state voltage 40TPS12
dV/dt
TEST CONDITIONS
TC = 79 °C, 180° conduction half sine wave
VALUES UNITS
35
55
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
t = 0.1 to 10 ms, no voltage reapplied
Initial TJ =
TJ maximum
TJ = 125 °C
110 A, TJ = 25 °C
TJ = 25 °C
TJ = 25 °C
TJ = 125 °C
VR = Rated VRRM/VDRM
TJ = TJ maximum, linear to 80 % VDRM, Rg-k = Open
500
600
1250
1760
12 500
1.02
1.23
9.74
7.50
1.85
100
150
300
0.5
10
500
1000
A
A2s
A2s
V
mΩ
V
A/µs
mA
V/µs
V/µs
TRIGGERING
PARAMETER
Maximum peak gate power
Maximum average gate power
Maximum peak gate current
Maximum peak negative gate voltage
Maximum required DC gate
voltage to trigger
Maximum required DC gate current to trigger
Maximum DC gate voltage not to trigger
w w wM.axDimaumt DaCSghateeceurtre4nt Unot. toc torigmger
SYMBOL
PGM
PG(AV)
IGM
- VGM
VGT
IGT
VGD
IGD
TEST CONDITIONS
TJ = - 40 °C
TJ = 25 °C
Anode supply = 6 V resistive load
TJ = 125 °C
TJ = - 40 °C
TJ = 25 °C
TJ = 125 °C
TJ = 25 °C, for 40TPS08A and 40TPS12A
TJ = 125 °C, VDRM = Rated value
VALUES UNITS
10
W
2.5
2.5 A
10 V
4.0
2.5 V
1.7
270
150
mA
80
40
0.25 V
6 mA
www.vishay.com
2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93708
Revision: 12-Sep-08





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)