LPC1102

LPC1102/1104 32-bit ARM Cortex-M0 microcontroller; 32 kB flash and 8 kB SRAM Rev. 7 — 26 September 2013 Product data sheet 1. General description The LPC1102/1104 are an ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures. The LPC1102/1104 operate at CPU frequencies of up to 50 MHz. The peripheral complement of the LPC1102/1104 includes 32 kB of flash memory, 8 kB of data memory, one RS-485/EIA-485 UART, one SPI interface with SSP features, four general purpose counter/timers, a 10-bit ADC, and 11 general purpose I/O pins. Remark: The LPC1104 has a revised pinout and contains several features not found in the LPC1102: Two extra GPIO pins (PIO0_1 and PIO0_6). Extra match output (CT32B0_MAT2). CLKOUT feature. Easier re-entry to ISP via PIO0_1. SSP0_CLK available on two pins (A1 and A2) to support debugging of SSP communication. Better positioning of the XTALIN pin for easier PCB layout. 2. Features and benefits  System:  ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.  ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).  Serial Wire Debug.  System tick timer.  Memory:  32 kB on-chip flash programming memory.  8 kB SRAM.  In-Application Programming (IAP) and In-System Programming (ISP) support via on-chip bootloader software.  D...