PI90LV022

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 PI90LV022, PI90LVB022 LVDS Mux/Repeater Features Meets or Exceeds the Requirements of ANSI TIA/ EIA-644-1995 Designed for Signaling Rates up to 650 Mbit/s (325 MHz) Operates from a 3.3V Supply: –40°C to +85°C Low Voltage Differential Signaling with Output Voltages of ±350mV into: - 100 Ohm load (PI90LV022) - 50 Ohm load Bus LVDS Signaling (PI90LVB022) Accepts ±350mV differential inputs Wide common mode input voltage range: 0.2V to 2.7V Output drivers are high impedance when disabled or when VCC ≤ 1.5V Inputs are open, short, and terminated fail safe Propagation Delay Time: 3.5ns ESD protection is 10kV on bus pins Bus Pins are High Impedance when disabled or with VCC less than 1.5V TTL Inputs are 5V I/O Tolerant Power Dissipation at 400Mbit/s less than 150mW Industrial temperature rating Packaging (Pb-free & Green available): - 16-pin SOIC (W) - 16-pin TSSOP (L) Description The PI90LV022 and PI90LVB022 are differential line drivers and receivers that use Low Voltage Differential Signaling (LVDS) to achieve signaling rates as high as 650 Mbps. The receiver outputs can be switched to either or both drivers through the multiplexer control signals S0 and S1. This allows t...