Current Reg. Diode
J500
Current Regulator Diode
Linear Systems replaces discontinued Siliconix J500
The Linear Systems J500 is a ± 20% ran...
J500
Current
Regulator Diode
Linear Systems replaces discontinued Siliconix J500
The Linear Systems J500 is a ± 20% range current
regulator
The J500 is a ±20% range current
regulator designed for demanding applications in test equipment and instrumentation. The J500 utilizes JFET techniques to produce a single two-leaded device which is extremely simple to operate. Two-Lead Plastic Package Guaranteed ±20% Tolerance Operation up to 50V Excellent Temperature Stability Simple Series Circuitry, No Separate Voltage Source Tight Guaranteed Circuit Performance Excellent Performance in Low-Voltage/Battery Circuits and High-Voltage Spike Protection High Circuit Stability vs. Temperature
www.DataSheet4U.com
J500 Applications: Constant-Current Supply Current-Limiting Timing Circuits
Available Packages: TO-92 Bare Die.
Please contact Micross for full package and die dimensions Micross Components Europe
Notes: 1. Absolute maximum ratings are limiting values above which serviceability may be impaired. 2. Pulsed, t = 2ms. Maximum VF where IF < 1.1IF(max). 3. Pulsed, t = 2ms. Continuous currents may vary. 4. Pulsed, t = 2ms. Continuous impedances may vary. 5. Min VF required to ensure IF = 0.8IF(min).
Tel: +44 1603 788967 Email:
[email protected] Web: http://www.micross.com/distribution
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor...