®
L4953K
MULTIFUNCTION VOLTAGE REGULATOR FOR CAR RADIO
3 OUTPUTS: 8.25V (500mA); 5V (1A); 5V (100mA) STANDBY OUT1 (8.2...
®
L4953K
MULTIFUNCTION VOLTAGE
REGULATOR FOR CAR RADIO
3 OUTPUTS: 8.25V (500mA); 5V (1A); 5V (100mA) STANDBY OUT1 (8.25V) AND OUT2 (5V) WITH INDEPENDENT ENABLE CONTROL FOR STANDBY MODE 1.5A HIGH SIDE DRIVER WITH CLAMPED OUTPUT (16V) LOGIC OUTPUT FOR: – SUPPLY UNDERVOLTAGE (LVW) – OVERVOLTAGE(FAULT) – THERMAL PROTECTION (FAULT) RESET FUNCTION IGNITION COMPARATOR REVERSE BATTERY AND LOAD DUMP PROTECTION THERMAL SHUTDOWN DESCRIPTION The L4953K contains a triple voltage
regulator and a power switch. The IC includes a monitoring circuit to warn if a BLOCK DIAGRAM
VS 7 LOAD DUMP AND REV BATT PROT SIG GND 3 5V, 100mA
REGULATOR STAND-BY 5V, 1000mA
REGULATOR SWITCHED 11
Multiwatt 15 ORDERING NUMBER: L4953K
low voltage or no voltage condition is occuring. In stand-by output is active as long as possible even when in thermal shutdown or any other fault conditions. The STCAP pin allows the use of a reserve supply capacitor that will hold enough energy for the 5V Stand-by line to allow the µP to store data.
STAND-BY 5V
9
OUT 5V
EN 5V STCAP EN 8.25V
1 12 8.25V, 500mA
REGULATOR SWITCHED 10
OUT 8.25V
2 16V, 1.5A VOLTAGE CLAMP SWITCHED 4
OUT 16V
EN 16V
15 VCAP REF GEN Vref1 LVW THRESHOLD Vref2 Reset THRESHOLD IGNITION THRESHOLD OVERVOLTAGE UNDERVOLTAGE THERMAL PROT RESET
IGN INP
5
PROT
POW GND
8 6
D94AU213B
13 LVW/FAULT
14 RESET
IGN OUT
June 2000
1/8
This is advanced information on a new product now in development or undergoing evaluation. Details are subject to chang...