10Base-T Interface Module
Low Profile SMD 10Base-T Interface Module for PCMCIA
ELECTRONICS INC.
EPE6050GM
• Optimized for AMD/PHY type chip for C...
Description
Low Profile SMD 10Base-T Interface Module for PCMCIA
ELECTRONICS INC.
EPE6050GM
Optimized for AMD/PHY type chip for Card Bus Robust construction allows for IR/VP processes Complies with or exceeds IEEE 802.3, 10Base-T Standards
www.DataSheet4U.net
Hipot : 200 Vrms (for 1 minute)
Electrical Parameters @ 25° C
Cut-Off Frequency (MHz) ± 1 MHz Xmit/Rcv 17/17 Insertion Loss (dB Max.) 1-10 MHz Xmit/Rcv -1/-1 Return Loss (dB Min.) 5-10 MHz Xmit/Rcv -15/-15 @ 20 MHz Xmit/Rcv -7/-5 Attenuation (dB Min.) @ 25 MHz Xmit/Rcv -18/-11 @ 30 MHz Xmit/Rcv -30/-18 @ 40 MHz Xmit/Rcv -35/-26 Common Mode Rejection (dB Min.) 30-100 MHz Xmit/Rcv -30/-30 Crosstalk (dB Min.) 1-10 MHz Between Channels -30/-30
Isolation : meets or exceeds 802.3 IEEE Requirements Characteristic Filter Impedance : 100 Ω Referenced to the filter output @ 5 MHz for filter only, excluding resistor network
Schematic
7 6 274Ω 68.1Ω 806Ω 5 4 68.1Ω LPF 7 Pole 1:1 10 Cable Side Transmit Channel 8 100Ω 9 3 49.9Ω 2 49.9Ω 1 Chip Side LPF 5 Pole 1:1 Receive Channel 13 100Ω 14 12 Cable Side
274Ω Chip Side
Note : All resistors are ± 1%, unless otherwise specified
Package
.790 (20.07) .095 (2.41) PCA .520 EPE6050GM (13.21) Date Code .200 (5.08) .085 (2.16)
.700 (17.78)
Pad Layout
Pin 1 I.D.
.595/.605 (15.11/15.37) .088/.094 (2.24/2.39) .033/.010 (.076/.254)
.030 (.762)
.100 (2.54)
0°-8°
.008/.013 (.203/.330)
.040 (1.02) .017/.022 (.432/.559) .097/.103 (2.46/2.62) .670 (17.02)
Unless Otherwise Specifi...
Similar Datasheet