Amplifier Module. APM1950-P29 Datasheet

APM1950-P29 Module. Datasheet pdf. Equivalent

Part APM1950-P29
Description Medium Power Amplifier Module
Feature plerowTM APM1950-P29 Low Noise & High OIP3 Medium Power Amplifier Module Features · S21 = 34.3 dB @ .
Manufacture Advanced Semiconductor Business
Total Page 6 Pages
Datasheet
Download APM1950-P29 Datasheet



APM1950-P29
Features
· S21 = 34.3 dB @ 1920 MHz
= 33.7 dB @ 1980 MHz
· NF of 1.8 dB over Frequency
www.D·ataUSnhceoent4dUit.ionnetally Stable
· Single 5V Supply
· High OIP3 @ Low Current
plerowTM APM1950-P29
Low Noise & High OIP3
Medium Power Amplifier Module
Description
The plerowTM APM-Series is an internally matched
amplifier mini-module for such application band in
SMD package with the output P1dB of 29 dBm. It is
compactly designed for low current consumption and
high OIP3. Integrating all the components for biasing
and matching within the module enhances production
yield and throughput as well. It passes through the
stringent DC, RF, and reliability tests. Not sample test
but 100% quality control test is made before packing.
Specifications (in Production)
Typ. @ T = 25°C, Vs = 5 V, Freq. = 1950 MHz, Zo.sys = 50 ohm
Parameter
Unit Specifications
Min Typ Max
Frequency Range
MHz
1920
1980
Gain
dB 33 34
Gain Flatness
dB
± 0.3
± 0.5
Noise Figure
dB
1.8 2.0
Output IP3 (1)
dBm 44 47
S11 / S22 (2)
dB
-18 / -10
Output P1dB
dBm 28 29
Switching Time (3)
µsec
-
Supply Current
mA
460 500
Supply Voltage
V
5
Impedance
50
Max. RF Input Power
Package Type & Size
dBm
mm
C.W 23 ~ 25 (before fail)
Surface Mount Type, 13Wx13Lx3.8H
Operating temperature is -40°C to +85°C.
1) OIP3 is measured with two tones at an output power of 15 dBm / tone separated by 1 MHz.
2) S11/S22 (max) is the worst value within the frequency band.
3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS.
Outline Drawing (Unit: mm)
2-stage Single Type
More Information
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
plerow
ASB Inc.
(Top View)
Solder Stencil Area
(Side View)
Ø0.3 plated thru holes to ground plane
1/6
(Bottom View)
Pin Number
3
8
10
Others
Function
RF In
RF Out
+Vcc
Ground
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
2 x Ø2.0 plated thru holes to screw on heat sinker
(Recommended Footprint)
www.asb.co.kr
February 2009



APM1950-P29
Typical Performance
(Measured)
1920~1980
+5 V
Stability Factor (K)
plerowTM APM1950-P29
Low Noise & High OIP3
Medium Power Amplifier Module
S-parameters
Noise Figure
OIP3
P1dB
2/6
www.asb.co.kr
February 2009





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)