MOSFET
DRF1301
1000V, 15A, 30MHz
MOSFET Push-Pull Hybrid
The DRF1301 is a push-pull hybrid containing two high power gate driv...
Description
DRF1301
1000V, 15A, 30MHz
MOSFET Push-Pull Hybrid
The DRF1301 is a push-pull hybrid containing two high power gate drivers and two power MOSFETs. It was designed to provide the syswww.DataSheet4U.net tem designer increased flexibility, higher performance, and lowered cost over a non-integrated solution. This low parasitic approach, coupled with the Schmitt trigger input, Kelvin signal ground, Anti-Ring function Invert and Non-invert select pin provide improved stability and control in Kilowatt to Multi-Kilowatt, High Frequency ISM applications.
D IN S D IN
DRIVER 15A MOSFETS
DRF 1301
S
FEATURES
Switching Frequency: DC TO 30MHz Inverting Non-Inverting Select Low Pulse Width Distortion Single Power Supply (Per Section) 1V CMOS Schmitt Trigger Input 1V Hysteresis Switching Speed 3-4ns BVds = 1000V Ids = 15A max. Per-section Rds(on) ≤ 1 Ohm PD = 550W Per-section RoHS Compliant
TYPICAL APPLICATIONS
Class C, D and E RF Generators Switch Mode Power Amplifiers HV Pulse Generators Ultrasound Transducer Drivers Acoustic Optical Modulators
Driver Absolute Maximum Ratings
Symbol VDD IN, FN IO PK TJMAX Parameter Supply Voltage Input Single Voltages Output Current Peak Operating Temperature Ratings 15 -.7 to +5.5 8 175 Unit V A °C
Driver Specifications
Symbol VDD IN IN(R) IN(F) IDDQ IO Ciss RIN VT(ON) VT(OFF) TDLY tr tf Parameter Supply Voltage Input Voltage Input Voltage Rising Edge Input Voltage Falling Edge Quiescent Current Output Current Input Capac...
Similar Datasheet
- DRF1300 MOSFET - Microsemi Corporation
- DRF1301 MOSFET - Microsemi Corporation
- DRF1311 MOSFET - Microsemi