KK74HC221A

TECHNICAL DATA KK74HC221A Dual Monostable Multivibrator The KK74HC221A is identical in pinout to the LS/ALS221. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. There are two trigger inputs, A INPUT (negative edge) and B INPUT (positive edge). These inputs are valid for rising/falling signals The device may also be triggered by using the RESET input (positiveedge) because of the Schmitt-trigger input; after triggering the output maintains the MONOSTABLE state for the time period determined by the external resistor REXT and capacitor CEXT. Taking RESET low breaks this MONOSTABLE STATE. If the next trigger pulse occurs during the MONOSTABLE period it makes the MONOSTABLE period longer. Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 3.0 to 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of CMOS Devices N SUFFIX PLASTIC 16 1 16 1 D SUFFIX SOIC ORDERING INFORMATION KK74HC221AN Plastic KK74HC221AD SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM 1A 1B 1RESET DEXT CEXT REXT CEXT DEXT REXT 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 V CC 1REXT/CEXT 1CEXT 1Q 2Q 2RESET 2B 2A 1Q 2Q 2CEXT 2REXT/CEXT GND FUNCTION TABLE PIN 16 =VCC PIN 8 = GND Note (1) CEXT, REXT, DEXT are external components. (2) DEXT is a clamping diode. The external capacitor is charged to VCC in the stand-by state, i.e. no trigger. When the supply voltage is turn...