DatasheetsPDF.com

Clock Oscillator. NBXMBB024 Datasheet

DatasheetsPDF.com

Clock Oscillator. NBXMBB024 Datasheet






NBXMBB024 Oscillator. Datasheet pdf. Equivalent




NBXMBB024 Oscillator. Datasheet pdf. Equivalent





Part

NBXMBB024

Description

LVPECL Clock Oscillator



Feature


NBXSBA024, NBXSBB024, NBXMBB024 2.5 V / 3.3 V, 622.08 MHz LVPECL Clock Oscillat or The single frequency, crystal oscill ator (XO) is designed to meet today’s requirements for 2.5 V / 3.3 V LVPECL clock generation applications. The devi ce uses a high Q fundamental crystal an d Phase Lock Loop (PLL) multiplier to p rovide 622.08 MHz, ultra low jitter and phase noise LVPECL .
Manufacture

ON Semiconductor

Datasheet
Download NBXMBB024 Datasheet


ON Semiconductor NBXMBB024

NBXMBB024; differential output. This device is a me mber of ON Semiconductor’s PureEdget clock family that provides accurate and precision clock solutions. Frequency s tability options available as either ± 50 PPM NBXSBA024 (Industrial Temperatu re Range) or ± 20 PPM NBXSBB024/NBXMBB 024 (Commercial Temperature Range). Ava ilable in 5 mm x 7 mm SMD (CLCC) packag e on 16 mm tape and re.


ON Semiconductor NBXMBB024

el in quantities of 1,000 and 100. Featu res http://onsemi.com MARKING DIAGRAM N BXyBx024 622.0800 AAWLYYWWG 6 PIN CLCC LN SUFFIX CASE 848AB • • • • • • • • • LVPECL Differentia l Output Uses High Q Fundamental Mode C rystal and PLL Multiplier Ultra Low Jit ter and Phase Noise − 0.5 ps (12 kHz − 20 MHz) Output Frequency − 622.08 MHz Hermetically Sealed Ceramic SMD Packa.


ON Semiconductor NBXMBB024

ge RoHS Compliant Operating Range: 2.5 V ±5% or 3.3 V ±10% Total Frequency St ability − ±20 PPM; ±50 PPM This is a Pb−Free Device NBXSBx024 = Specifi c Device Code x = A or B y = S or M = N BXSBA024 (±50 PPM) = NBXSBB024 (±20 P PM) 622.0800 = Output Frequency (MHz) A A = Assembly Location WL = Wafer Lot YY = Year WW = Work Week G = Pb−Free Pa ckage ORDERING INFORMATION De.

Part

NBXMBB024

Description

LVPECL Clock Oscillator



Feature


NBXSBA024, NBXSBB024, NBXMBB024 2.5 V / 3.3 V, 622.08 MHz LVPECL Clock Oscillat or The single frequency, crystal oscill ator (XO) is designed to meet today’s requirements for 2.5 V / 3.3 V LVPECL clock generation applications. The devi ce uses a high Q fundamental crystal an d Phase Lock Loop (PLL) multiplier to p rovide 622.08 MHz, ultra low jitter and phase noise LVPECL .
Manufacture

ON Semiconductor

Datasheet
Download NBXMBB024 Datasheet




 NBXMBB024
NBXSBA024, NBXSBB024,
NBXMBB024
2.5 V / 3.3 V, 622.08 MHz
LVPECL Clock Oscillator
The single frequency, crystal oscillator (XO) is designed to meet
today’s requirements for 2.5 V / 3.3 V LVPECL clock generation
applications. The device uses a high Q fundamental crystal and Phase
Lock Loop (PLL) multiplier to provide 622.08 MHz, ultra low jitter
and phase noise LVPECL differential output.
This device is a member of ON Semiconductor’s PureEdget clock
family that provides accurate and precision clock solutions.
Frequency stability options available as either ±50 PPM
NBXSBA024 (Industrial Temperature Range) or ±20 PPM
NBXSBB024/NBXMBB024 (Commercial Temperature Range).
Available in 5 mm x 7 mm SMD (CLCC) package on 16 mm tape
and reel in quantities of 1,000 and 100.
Features
LVPECL Differential Output
Uses High Q Fundamental Mode Crystal and PLL Multiplier
Ultra Low Jitter and Phase Noise 0.5 ps (12 kHz 20 MHz)
Output Frequency 622.08 MHz
Hermetically Sealed Ceramic SMD Package
RoHS Compliant
Operating Range: 2.5 V ±5% or 3.3 V ±10%
Total Frequency Stability ±20 PPM; ±50 PPM
This is a PbFree Device
Applications
SONET Line Card
Networking
Optical Systems
VDD
6
CLK CLK
54
Crystal
PLL
Clock
Multiplier
12
OE NC
NC* OE*
*NBXMBB024 device pintout
3
GND
Figure 1. Simplified Logic Diagram
http://onsemi.com
MARKING DIAGRAM
6 PIN CLCC
LN SUFFIX
CASE 848AB
NBXyBx024
622.0800
AAWLYYWWG
NBXSBx024 = Specific Device Code
x = A or B
y = S or M
= NBXSBA024 (±50 PPM)
= NBXSBB024 (±20 PPM)
622.0800 = Output Frequency (MHz)
AA = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = PbFree Package
ORDERING INFORMATION
Device
Package Shipping
NBXSBA024LN1TAG CLCC6
1000/
(PbFree) Tape & Reel
NBXSBB024LN1TAG* CLCC6
1000/
(PbFree) Tape & Reel
NBXSBA024LNHTAG CLCC6
100/
(PbFree) Tape & Reel
NBXMBB024LN1TAG CLCC6
1000/
(PbFree) Tape & Reel
NBXMBB024LNHTAG CLCC6
100/
(PbFree) Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
* Please contact sales office for availability
© Semiconductor Components Industries, LLC, 2011
www.DatAaSphreile,t240U1.1net Rev. 4
1
Publication Order Number:
NBXSBA024/D




 NBXMBB024
NBXSBA024, NBXSBB024, NBXMBB024
OE 1
NC 2
6 VDD
5 CLK
NC 1
OE 2
6 VDD
5 CLK
GND
3 4 CLK
GND 3
4 CLK
NBXSxxxxx
NBXMxxxxx
Figure 2. Pin Connections (Top View)
Table 1. PIN DESCRIPTION
Pin No.
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ1
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ2
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ3
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ4
Symbol
OE/NC*
NC/OE*
GND
CLK
I/O
LVTTL/LVCMOS
Control Input
N/A
Power Supply
LVPECL Output
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ5 CLK LVPECLOutput
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ6 VDD PowerSupply
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ*NBXMBA024 device pinout
Description
Output Enable Pin. When left floating pin defaults to logic HIGH and output is active.
See OE pin description Table 2.
No Connect.
Ground 0 V
NonInverted Clock Output. Typically loaded with 50 W receiver termination resistor to
VTT = VDD 2 V.
Inverted Clock Output. Typically loaded with 50 W receiver termination resistor to
VTT = VDD 2 V.
Positive power supply voltage. Voltage should not exceed 2.5 V ±5% or 3.3 V ±10%.
Table 2. OUTPUT ENABLE TRISTATE FUNCTION
OE Pin
Output Pins
Open
Active
HIGH Level
Active
LOW Level
High Z
Table 3. ATTRIBUTES
Characteristic
Value
Internal Default State Resistor
170 kW
ESD Protection
Human Body Model
Machine Model
2 kV
200 V
Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
1. For additional Moisture Sensitivity information, refer to Application Note AND8003/D.
Table 4. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
Condition 2
Rating
Units
VDD Positive Power Supply
Iout LVPECL Output Current
GND = 0 V
Continuous
Surge
4.6 V
25 mA
50
TA Operating Temperature Range
40 to +85
°C
Tstg Storage Temperature Range
55 to +120
°C
Tsol Wave Solder
See Figure 5
260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2




 NBXMBB024
NBXSBA024, NBXSBB024, NBXMBB024
Table 5. DC CHARACTERISTICS (VDD = 2.5 V ± 5%; 3.3 V ± 10%, GND = 0 V, TA = 40°C to +85°C) (Note 2)
Symbol
Characteristic
Conditions
Min.
Typ.
Max.
Units
IDD Power Supply Current
95 105 mA
VIH OE Input HIGH Voltage
2000
VDD
mV
VIL OE Input LOW Voltage
GND 300
800 mV
IIH Input HIGH Current
OE
100
+100
mA
IIL Input LOW Current
OE
100
+100
mA
VOH Output HIGH Voltage
VDD1195
VDD945
mV
VOL Output LOW Voltage
VDD1945
VDD1600
mV
VOUTPP
Output Voltage Amplitude
700 mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. Measurement taken with outputs terminated with 50 W to VDD 2.0 V. See Figure 4.
Table 6. AC CHARACTERISTICS (VDD = 2.5 V ± 5%; 3.3 V ± 10%, GND = 0 V, TA = 40°C to +85°C) (Note 3)
Symbol
Characteristic
Conditions
Min.
Typ.
Max.
fCLKOUT
Output Clock Frequency
622.08
Df Frequency Stability
NBXSBB024, NBXMBB024
0°C to +70°C
NBXSBA024
40°C to +85°C
(Note 4)
±20
±50
Units
MHz
ppm
FNOISE
PhaseNoise Performance
fCLKout = 622.08 MHz
(See Figure 3)
100 Hz of Carrier
1 kHz of Carrier
10 kHz of Carrier
88
108
115
dBc/Hz
dBc/Hz
dBc/Hz
100 kHz of Carrier
116
dBc/Hz
1 MHz of Carrier
122
dBc/Hz
10 MHz of Carrier
149
dBc/Hz
tjit(F)
tjitter
RMS Phase Jitter
Cycle to Cycle, RMS
Cycle to Cycle, PeaktoPeak
12 kHz to 20 MHz
1000 Cycles
1000 Cycles
0.5 0.7 ps
1.5 8 ps
15 30 ps
Period, RMS
10,000 Cycles
1 4 ps
Period, PeaktoPeak
10,000 Cycles
10 20 ps
tOE/OD
tDUTY_CYCLE
Output Enable/Disable Time
Output Clock Duty Cycle
(Measured at Cross Point)
200 ns
45 50 55 %
tR Output Rise Time (20% and 80%)
250 400 ps
tF Output Fall Time (80% and 20%)
250 400 ps
tstart Startup Time
Aging
1st Year
1 5 ms
3 ppm
Every Year After 1st
1 ppm
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Measurement taken with outputs terminated with 50 W to VDD 2.0 V. See Figure 4.
4. Parameter guarantee 10 years aging. Includes initial stability at 25°C, shock, vibration, and first year aging.
http://onsemi.com
3






Recommended third-party NBXMBB024 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)