DatasheetsPDF.com

Clock Oscillator. NBXSGA008 Datasheet

DatasheetsPDF.com

Clock Oscillator. NBXSGA008 Datasheet






NBXSGA008 Oscillator. Datasheet pdf. Equivalent




NBXSGA008 Oscillator. Datasheet pdf. Equivalent





Part

NBXSGA008

Description

LVPECL Clock Oscillator

Manufacture

ON Semiconductor

Datasheet
Download NBXSGA008 Datasheet


ON Semiconductor NBXSGA008

NBXSGA008; NBXSGA008 2.5/3.3 V, 161.1328 MHz LVPECL Clock Oscillator The NBXSGA008, single frequency, crystal oscillator (XO) is designed to meet today’s requirements for 2.5/3.3 V LVPECL clock generation applications. The device uses a high Q fundamental crystal and Phase Lock Loop (PLL) multiplier to provide 161.1328 M Hz, ultra low jitter and phase noise LV PECL differential ou.


ON Semiconductor NBXSGA008

tput. This device is a member of ON Semi conductor’s PureEdget clock family th at provides accurate and precision cloc k solutions. Available in 5 mm x 7 mm S MD (CLCC) package on 16 mm tape and ree l in quantities of 100 and 1,000. Featu res http://onsemi.com MARKING DIAGRAM N BXSGA008 161.1328 AAWLYYWWG • • • • • • • • • • • LVPECL Differential Output Uses High Q Fun.


ON Semiconductor NBXSGA008

damental Mode Crystal and PLL Multiplier Ultra Low Jitter and Phase Noise − 0 .5 ps (12 kHz − 20 MHz) Output Freque ncy − 161.1328 MHz Hermetically Seale d Ceramic SMD Package RoHS Compliant Op erating Range: 2.5 V ±5% or 3.3 V ±10 % Total Frequency Stability − $50 PPM This is a Pb−Free Device Networking / Telecom Storage 10 GE WLAN 6 PIN CLC C LN SUFFIX CASE 848AB NBXSGA.



Part

NBXSGA008

Description

LVPECL Clock Oscillator

Manufacture

ON Semiconductor

Datasheet
Download NBXSGA008 Datasheet




 NBXSGA008
NBXSGA008
2.5/3.3 V, 161.1328 MHz
LVPECL Clock Oscillator
The NBXSGA008, single frequency, crystal oscillator (XO) is
designed to meet today’s requirements for 2.5/3.3 V LVPECL clock
generation applications. The device uses a high Q fundamental crystal
and Phase Lock Loop (PLL) multiplier to provide 161.1328 MHz,
ultra low jitter and phase noise LVPECL differential output.
This device is a member of ON Semiconductor’s PureEdget clock
family that provides accurate and precision clock solutions.
Available in 5 mm x 7 mm SMD (CLCC) package on 16 mm tape
and reel in quantities of 100 and 1,000.
Features
LVPECL Differential Output
Uses High Q Fundamental Mode Crystal and PLL Multiplier
Ultra Low Jitter and Phase Noise 0.5 ps (12 kHz 20 MHz)
Output Frequency 161.1328 MHz
Hermetically Sealed Ceramic SMD Package
RoHS Compliant
Operating Range: 2.5 V ±5% or 3.3 V ±10%
Total Frequency Stability $50 PPM
This is a PbFree Device
Applications
Networking / Telecom
Storage
10 GE
WLAN
VDD
6
CLK CLK
54
http://onsemi.com
MARKING DIAGRAM
6 PIN CLCC
LN SUFFIX
CASE 848AB
NBXSGA008
161.1328
AAWLYYWWG
NBXSGA008 = NBXSGA008 (±50 PPM)
161.1328 = Output Frequency (MHz)
AA = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = PbFree Package
ORDERING INFORMATION
Device
Package Shipping
NBXSGA008LN1TAG CLCC6 1000/Tape & Reel
(PbFree)
NBXSGA008LNHTAG CLCC6 100/Tape & Reel
(PbFree)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Crystal
PLL
Clock
Multiplier
1 23
OE NC GND
Figure 1. Simplified Logic Diagram
© Semiconductor Components Industries, LLC, 2011
www.DatAaSphreile,t240U1.1net Rev. 0
1
Publication Order Number:
NBXSGA008/D





 NBXSGA008
NBXSGA008
OE 1
NC 2
6 VDD
5 CLK
GND 3
4 CLK
Figure 2. Pin Connections (Top View)
Table 1. PIN DESCRIPTION
Pin No.
1
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ2
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ3
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ4
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ5
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ6
Symbol
OE
NC
GND
CLK
CLK
VDD
I/O
LVTTL/LVCMOS
Control Input
N/A
Power Supply
LVPECL Output
LVPECL Output
Power Supply
Description
Output Enable Pin. When left floating pin defaults to logic HIGH and output is active.
See OE pin description Table 2.
No Connect.
Ground 0 V
NonInverted Clock Output. Typically loaded with 50 W receiver termination resistor to
VTT = VDD 2 V.
Inverted Clock Output. Typically loaded with 50 W receiver termination resistor to
VTT = VDD 2 V.
Positive power supply voltage. Voltage should not exceed 2.5 V ±5% or 3.3 V ±10%.
Table 2. OUTPUT ENABLE TRISTATE FUNCTION
OE Pin
Output Pins
Open
Active
HIGH Level
Active
LOW Level
High Z
Table 3. ATTRIBUTES
Characteristic
Value
Internal Default State Resistor
170 kW
ESD Protection
Human Body Model
Machine Model
2 kV
200 V
Meets or Exceeds JEDEC Standard EIA/JESD78 IC Latchup Test
1. For additional Moisture Sensitivity information, refer to Application Note AND8003/D.
Table 4. MAXIMUM RATINGS
Symbol
Parameter
Condition 1
Condition 2
Rating
Units
VDD Positive Power Supply
Iout LVPECL Output Current
GND = 0 V
Continuous
Surge
4.6 V
25 mA
50
TA Operating Temperature Range
40 to +85
°C
Tstg Storage Temperature Range
55 to +120
°C
Tsol Wave Solder
See Figure 5
260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2





 NBXSGA008
NBXSGA008
Table 5. DC CHARACTERISTICS (VDD = 2.5 V ± 5%; 3.3 V ± 10%, GND = 0 V, TA = 40°C to +85°C) (Note 2)
Symbol
Characteristic
Conditions
Min.
Typ.
Max.
Units
IDD Power Supply Current
91 105 mA
VIH OE Input HIGH Voltage
2000
VDD
mV
VIL OE Input LOW Voltage
GND 300
800 mV
IIH Input HIGH Current
OE
100
+100
mA
IIL Input LOW Current
OE
100
+100
mA
VOH Output HIGH Voltage
VDD1195
VDD945
mV
VOL Output LOW Voltage
VDD1945
VDD1600
mV
VOUTPP
Output Voltage Amplitude
700 mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. Measurement taken with outputs terminated with 50 W to VDD 2.0 V. See Figure 4.
Table 6. AC CHARACTERISTICS (VDD = 2.5 V ± 5%; 3.3 V ± 10%, GND = 0 V, TA = 40°C to +85°C) (Note 3)
Symbol
Characteristic
Conditions
Min.
Typ.
Max.
fCLKOUT
Output Clock Frequency
161.1328
Df Frequency Stability NBXSGA008
(Note 4)
±50
FNOISE
PhaseNoise Performance
fCLKout = 161.1328 MHz
(See Figure 3)
100 Hz of Carrier
1 kHz of Carrier
99
119
10 kHz of Carrier
126
Units
MHz
ppm
dBc/Hz
dBc/Hz
dBc/Hz
100 kHz of Carrier
127
dBc/Hz
1 MHz of Carrier
135
dBc/Hz
10 MHz of Carrier
160
dBc/Hz
tjit(F)
tjitter
RMS Phase Jitter
Cycle to Cycle, RMS
Cycle to Cycle, PeaktoPeak
12 kHz to 20 MHz
1000 Cycles
1000 Cycles
0.5 0.7 ps
1.6 8 ps
10 30 ps
Period, RMS
10,000 Cycles
1 4 ps
Period, PeaktoPeak
10,000 Cycles
7 20 ps
tOE/OD
tDUTY_CYCLE
Output Enable/Disable Time
Output Clock Duty Cycle
(Measured at Cross Point)
200 ns
48 50 52 %
tR Output Rise Time (20% and 80%)
250 400 ps
tF Output Fall Time (80% and 20%)
250 400 ps
tstart Startup Time
Aging
1st Year
1 5 ms
3 ppm
Every Year After 1st
1 ppm
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 Ifpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. Measurement taken with outputs terminated with 50 W to VDD 2.0 V. See Figure 4.
4. Parameter guarantees 10 years of aging. Includes initial stability at 25°C, shock, vibration, and first year aging.
http://onsemi.com
3



Recommended third-party NBXSGA008 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)