DS10CP152Q

www.DataSheet.co.kr DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch June 3, 2008 DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch General Description The DS10CP152Q is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower device return losses, reduce component count and further minimize board space. Features ■ AECQ-100 Grade 3 ■ DC - 1.5 Gbps low jitter, low skew, low power operation ■ Pin configurable, fully differential, non-blocking ■ ■ ■ ■ architecture Wide Input Common Mode Voltage Range allows DCcoupled interface to LVDS, CML and LVPECL drivers On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space 8 kV ESD on LVDS I/O pins protects adjoining components Small SOIC-16 space saving package Applications ■ Automotive display applications ■ Clock and data buffer...