DatasheetsPDF.com

STK433-320-E Dataheets PDF



Part Number STK433-320-E
Manufacturers Sanyo Semicon Device
Logo Sanyo Semicon Device
Description 3-channel class AB audio power IC
Datasheet STK433-320-E DatasheetSTK433-320-E Datasheet (PDF)

Ordering number : EN*A1630 www.DataSheet4U.com Thick-Film Hybrid IC STK433-290-E Overview 3-channel class AB audio power IC, 80W+80W+80W The STK433-290-E is a hybrid IC designed to be used in 80W × 3ch class AB audio power amplifiers. Applications • Audio power amplifiers. Features • Pin-to-pin compatible outputs ranging from 80W to 150W. • Can be used to replace the STK433-000/-100 series (30W to 150W × 2ch) and STK433-200(A) series (30W to 60W × 3ch) due to its pin compatibility. • Mini.

  STK433-320-E   STK433-320-E


Document
Ordering number : EN*A1630 www.DataSheet4U.com Thick-Film Hybrid IC STK433-290-E Overview 3-channel class AB audio power IC, 80W+80W+80W The STK433-290-E is a hybrid IC designed to be used in 80W × 3ch class AB audio power amplifiers. Applications • Audio power amplifiers. Features • Pin-to-pin compatible outputs ranging from 80W to 150W. • Can be used to replace the STK433-000/-100 series (30W to 150W × 2ch) and STK433-200(A) series (30W to 60W × 3ch) due to its pin compatibility. • Miniature package (64.0mm × 36.6mm × 9.0mm) • Output load impedance: RL = 6Ω to 4Ω supported • Allowable load shorted time: 0.3 second • Allows the use of predesigned applications for standby and mute circuits. Series Models STK433-290-E Output 1 (10%/1kHz) Output 2 (0.4%/20Hz to 20kHz) Maximum rating VCC max (no sig.) Maximum rating VCC max (6Ω) Recommended operating VCC (6Ω) Dimensions (excluding pin height) 80W×3ch 50W×3ch ±54V ±47V ±33V STK433-300-E 100W×3ch 60W×3ch ±57V ±50V ±36V STK433-320-E 120W×3ch 80W×3ch ±65V ±57V ±41V STK433-330-E 150W×3ch 100W×3ch ±71.5V ±63V ±44V 64.0mm×36.6mm×9.0mm Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 21710HKIM No. A1630-1/13 STK433-290-E Specifications Absolute maximum ratings at Ta=25°C, Unless otherwise specified Tc=25°C Parameter Maximum power supply voltage Maximum power supply voltage Minimum operating supply voltage #13 Operating voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Allowable time for load short-circuit Symbol VCC max (0) VCC max (1) VCC min VST OFF max θj-c Tj max Tc max Tstg ts VCC=±33V, RL=6Ω, f=50Hz, PO=50W, 1-channel active Per one power transistor Should satisfy Tj max and Tc max Non signal RL≥6Ω Conditions Ratings ±54 ±47 ±10 -0.3 to +5.5 2.1 150 125 -30 to +125 0.3 Unit V V V V °C/W °C °C °C s www.DataSheet4U.com Operating Characteristics at Unless otherwise specified Tc=25°C, RL=6Ω (Non-inductive Load), Rg=600Ω, VG=30dB Conditions *2 Parameter Output power *1 Symbol PO (1) PO (2) Total harmonic distortion *1 THD (1) THD (2) Frequency characteristics *1 Input impedance Output noise voltage Quiescent current Output neutral voltage #13 Stand-by ON threshold *5 *3 fL, fH ri VNO ICCO VN VST ON VST OFF VCC (V) ±33 ±33 ±33 ±33 ±33 ±33 ±39 ±39 ±39 ±33 ±33 Stand-by Operation 2.5 1k f (Hz) 20 to 20k 1k 20 to 20k 1k 1.0 1.0 Rg=2.2kΩ No loading 30 -70 70 0 0 3.0 +0 -3dB 5.0 PO (W) THD (%) 0.4 10 VG=30dB 0.01 20 to 50k 55 1.0 120 +70 0.6 Hz kΩ mVrms mA mV V V min 47 Ratings unit typ 50 80 0.4 % max W #13 Stand-by OFF threshold *5 [Remarks] *1: For 1-channel operation *2: Unless otherwise specified, use a constant-voltage power supply to supply power when inspections are carried out. *3: The output noise voltage values shown are peak values read with a VTVM. However, an AC stabilized (50Hz) power supply should be used to minimize the influence of AC primary side flicker noise on the reading. *4: Use the transformer power supply circuit shown in the figure below for allowable load shorted time and output noise voltage measurement. *5: The impression voltage of ‘#13 (Stand-By) pin’ must not exceed the maximum rating. Power amplifier operate by impressing voltage +2.5 to +5.5V to ‘#13 (Stand-By) pin’. *6: Please connect -PreVCC pin (#1 pin)with the stable minimum voltage, and connect so that curren.


STK433-300-E STK433-320-E STK433-330-E


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)