AT29LV010A

www.DataSheet.co.kr Features Single Supply Voltage, Range 3V to 3.6V 3-volt Only Read and Write Operation Software Protected Programming Fast Read Access Time - 120 ns Low Power Dissipation – 15 mA Active Current – 40 µA CMOS Standby Current Sector Program Operation – Single Cycle Reprogram (Erase and Program) – 1024 Sectors (128 Bytes/Sector) – Internal Address and Data Latches for 128 Bytes Two 8K Bytes Boot Blocks with Lockout Fast Sector Program Cycle Time - 20 ms Internal Program Control and Timer DATA Polling for End of Program Detection Typical Endurance > 10,000 Cycles CMOS and TTL Compatible Inputs and Outputs Commercial and Industrial Temperature Ranges 1-megabit (128K x 8) 3-volt Only Flash Memory AT29LV010A Description The AT29LV010A is a 3-volt only in-system Flash programmable and erasable read only memory (Flash). Its 1 megabit of memory is organized as 131,072 bytes by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 120 ns with power dissipation of just 54 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 40 µA. The device endurance is such that any sector can typically be written to in excess of 10,000 times. Pin Configurations Pin Name A0 - A16 CE OE WE I/O0 - I/O7 NC Function Addresses Chip Enable Output Enable Write Enable Data Inputs/Outputs No Connect A11 A9 A8 A13 A14 NC WE VCC NC A16 A15 A12 A7 A6 A5 A4 1...