DatasheetsPDF.com

ST-10 Dataheets PDF



Part Number ST-10
Manufacturers ELECTRONIC AUTOMATION
Logo ELECTRONIC AUTOMATION
Description Sequential Timers
Datasheet ST-10 DatasheetST-10 Datasheet (PDF)

www.DataSheet.co.kr Quick Reference Guide Sequential Timers ST-10/ST-10M1/ST-6M1/ST-10M2 ELECTRONIC AUTOMATION (P) LTD P. B. # 6414, Yelahanka, Bangalore - 560064 Phones: 0091 - 080 - 8567561 / 8567562 Fax : 080 - 8567129 E-mail : [email protected] URL : www.eaplindia.com Sequential Timer Quick Reference Guide Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr Thank you for purchasing EAPL’S Sequential Timer. This instruction manual describes every aspect of installation, set.

  ST-10   ST-10


Document
www.DataSheet.co.kr Quick Reference Guide Sequential Timers ST-10/ST-10M1/ST-6M1/ST-10M2 ELECTRONIC AUTOMATION (P) LTD P. B. # 6414, Yelahanka, Bangalore - 560064 Phones: 0091 - 080 - 8567561 / 8567562 Fax : 080 - 8567129 E-mail : [email protected] URL : www.eaplindia.com Sequential Timer Quick Reference Guide Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr Thank you for purchasing EAPL’S Sequential Timer. This instruction manual describes every aspect of installation, set-up, and operation of the Sequential Timer. If you run into difficulties and need technical assistance, feel free to call our technical support at (080) 8567561 available between 9 AM – 5:30PM IST or visit our web site at www.eaplindia.com. EAPL, an ISO 9001 company, leaders in Timer Technology Brings to you a new range of micro controller based programmable timers. High reliability, accuracy, compactness are some of the striking design features. Uncompromising quality with cost effectiveness has been the watchword at EAPL. For Customer Use Enter below the serial Number which is located on the timer cabinet. Retain this information for future reference. Model No: Serial No: Batch No: Date of Purchase: Purchase Point: Accessories  Sequential Timer - 1 no.  Quick reference guide Note: Please acknowledge that we reserve the right to make changes in product performance or specifications without prior notice. Also please note that we bear no responsibility for mistakes, misprints or omissions of the instruction manual Specifications. Sequential Timer Quick Reference Guide Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr Salient Features       State of the art microcontroller design User friendly programming for On/Off time selection up to 99 hrs 59 mins. 7 segment display indication for channel & timing operation. Multiple units can be cascaded to obtain more channels. Program & process value retention incase of power failure. External contacts for timing initiation & timing pause.  I n f o r m a t i o n Ordering * OLP=On line programming Model ST-10 ST-10M1 ST-6M1 ST-10M2 Function Sequential switching with OLP Relay Output Sequential switching without OLP Relay Output 6-channel Sequential switching without OLP Relay Output Sequential switching without OLP Triac Output Output Relay Relay Relay Triac Source Voltage 110V AC 240V AC 110V AC 240V AC 110V AC 240V AC 110V AC 240V AC Time Range 0.1 sec to 99 hrs 59 mins 0.1 sec to 99 hrs 59 mins 0.1 sec to 99 hrs 59 mins 0.01 sec to 99 hrs 59 mins Specia l Features HOLD: When the slide switch on the front panel is kept in the hold position, the Timing data is retained in case of power failure. Upon resumption of power the timing continues from the point where it has stopped. RESTART: When the slide switch is kept in the restart position, the timer resets in case of power failure and starts from beginning upon power resumption. EXTERNAL START: By shorting terminals S1 and S2 for minimum period of 120 milliseconds (potential free shorting) or by keeping S1 and S2 permanently shorted, the timer sequence is initiated. SINGLE CYCLE OPERATION: By keeping the terminals C1 and C2 shorted (potential Free) on the front panel, the sequential switching of output is executed for one Cycle and stops. CYCLIC OPERATION: By keeping the terminals C1 and C2 on the front panel open, the Sequential switching of outputs keeps repeating after the end of each cycle. INHIBIT: By shorting terminals I1 and I2 (potential free) on the front panel, status of relays/triac output (ON or OFF) is maintained irrespective of the program timing. By removing the short, the programmed timing continues and relay / triac respond as per the preprogrammed timings. Sequential Timer Quick Reference Guide Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr CYCLE COMPLETE OUTPUT: This feature namely an opto coupled output signal from terminals O1 and O2 is available at the end of one switching sequence. This signal is intended for cascading one or more units to increase the number of output channels. ONLINE PROGRAMMING: This facility is provided only in model ST10 wherein it permits the user to change the program online by setting the switches in “PROG” position making the required changes in timing and implementing the same, for the cycle in progress. Specifications Operating Voltage Range Rated frequency Power consumption Number of channels ON / OFF time range Control output - 15% to + 10% of rated voltage 50 Hz  5% 15V A / 3W ac approx. 10 (RLYO –RLY9) 10(OP0 – OP9) for ST-10M2 6 (RLYO –RLY5) for ST-6M1 0.1 sec to 99hrs 59mins. For each channel 0.01 secs to 99hrs 59mins. In ST 10 M2 NO relay contacts rated for 10A@ 250V AC/28V DC Resistive for ST 10 M1, ST 6M1 For ST-10M2 10 triac output (OP0 - OP9) rated 500mA @ 250V AC resistive  0.1% max w.r.t setting  50msecs.  0.2% max w.r.t setting  20msecs for ST-10M2  0.05% max 50msecs.  0.3% max. 20msecs for ST-10.


ST-6M1 ST-10 ST-10M1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)