DatasheetsPDF.com

LXMG221D-0700040-D2F Dataheets PDF



Part Number LXMG221D-0700040-D2F
Manufacturers Microsemi
Logo Microsemi
Description 40W 700mA Dimmable HV LED Driver
Datasheet LXMG221D-0700040-D2F DatasheetLXMG221D-0700040-D2F Datasheet (PDF)

www.DataSheet.co.kr LXMG221D-0700040-D2F LXMG2203 TM ® 40W 700mA Dimmable HV LED Driver Module P RODUCTION D ATASHEET • DESCRIPTION KEY FEATURES • High Voltage AC Input: 347VAC to 480VAC • High Efficiency • Active Power Factor Correction • Constant Current 700mA • Dimming Input Provides 10% to 100% Range, Plus Shutdown • Anode Supply Adjusts for String Voltage between 40V and 57V • Small Compact Size • Suitable for Damp Locations (IP66) • UL8750 & UL1310 • UL File E337545 • FCC Class B • Lon.

  LXMG221D-0700040-D2F   LXMG221D-0700040-D2F



Document
www.DataSheet.co.kr LXMG221D-0700040-D2F LXMG2203 TM ® 40W 700mA Dimmable HV LED Driver Module P RODUCTION D ATASHEET • DESCRIPTION KEY FEATURES • High Voltage AC Input: 347VAC to 480VAC • High Efficiency • Active Power Factor Correction • Constant Current 700mA • Dimming Input Provides 10% to 100% Range, Plus Shutdown • Anode Supply Adjusts for String Voltage between 40V and 57V • Small Compact Size • Suitable for Damp Locations (IP66) • UL8750 & UL1310 • UL File E337545 • FCC Class B • Long Life Expectancy • RoHS Compliant • Full Protection: OVP, SCP, OTP, Maximum Power Limit • Unique Fault Detection and Management • The LXMG221D-0700040-D2F is a fully enclosed compact solid-state LED lighting driver module. It operates from a universal AC input supply in the range of 347VAC to 480VAC, 60Hz to drive a string of LEDs with active power factor correction. LED string voltage can range from 40V to 57V at a constant current of 700mA. Control terminal leads include a dimming input BRITE A with a dedicated RETURN lead. The amplitude of the output LED string current will vary from 10% to 100% corresponding to a 1VDC to 10VDC signal on the BRITE A input following the 0V to 10V ESTA E1.3-2001 Analog Control Specification Standard. The BRITE A terminal when pulled down below minimum dimming will turn off the LEDs and enter a low power consumption mode. A second control terminal lead provides a FAULT indicator. In the case that there is an LED string short between OUTPUT(+) and OUTPUT(-), or string open, or a product over temperature condition the FAULT terminal will go low. The FAULT terminal includes an open collector device that can be pulled up to a maximum of 60V and will sink 8mA typical to 0.8V when a short or open fault occurs. To reduce audible noise the internal switching frequency remains above 30kHz. Safety features include open output circuit protection, whole string short circuit protection. The maximum allowable hot spot case temperature is 90°C (above this temperature the module will be thermally self-protected). The recommended operating ambient temperature range is -30°C to 70°C, as long as the maximum case temperature is not exceeded. The compact enclosure is rated to IP66, meets UL8750 and UL1310 class 2. WWW . Microsemi . C OM APPLICATIONS Residential and Commercial LED Lighting Fixtures such as: • LED Down Lights • LED Street Lights IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Patents Pending PRODUCT HIGHLIGHT LXMG221D-0700040-D2F Photo is representative only, actual product may differ slightly ORDER INFORMATION Part Number LXMG221D-0700040-D2F Input Voltage 347VAC to 480VAC 60Hz Output Current 700mA Dimmable Current Source 40V to 57V Anode Voltage Fault Output Yes Copyright © 2011 Rev. 1.0, 2011-10-03 Microsemi Analog Mixed Signal Group 11861 Western Avenue, Garden Grove, CA. 92841, 800-877-6458, 714-898-8121, Fax: 714-893-2570 Page 1 Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr LXMG221D-0700040-D2F LXMG2203 TM ® 40W 700mA Dimmable HV LED Driver Module P RODUCTION D ATASHEET ABSOLUTE MAXIMUM RATINGS Input Voltage (VIN) ............................................................................................................................................ 0VAC to 528VAC Input Power ......................................................................................................................................... 50W (Internally Limited) Input Frequency (VIN) .......................................................................................................................................... 57Hz to 63Hz Peak Output LED String Current .................................................................................................... 810mA (Internally Limited) Peak Output String Voltage .............................................................................................................. 59.5V (Internally Limited) Output Power ...................................................................................................................................... 44W (Internally Limited) Input Signal Voltage (BRITE A Input) ........................................................................... -0.3V to greater of 10V or OUTPUT(+) Output Signal Voltage (FAULT) ............................................................................................................................ -0.3V to 60V Cold Start Temperature....................................................................................................................................................-30°C Hot Spot Case Temperature, zero airflow ......................................................................................................................... 90°C Storage Temperature Range ..............................................................................................................................-40°C t.


CLAA070LB01CW LXMG221D-0700040-D2F JHM10


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)