ESD7004

DATA SHEET www.onsemi.com SD Protection Diode Low Capacitance ESD Protection Diode for High Speed Data Line ESD7004, SZESD7004 The ESD7004 surge protection is designed to protect high speed data lines from ESD. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed differential lines such as USB 3.0 and HDMI. Features  Low Capacitance (0.4 pF Typical, I/O to GND)  Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4)  Low ESD Clamping Voltage  SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable  This is a Pb−Free Device Typical Applications  USB 3.0  HDMI  Display Port  eSATA UDFN10 CASE 517BB MARKING DIAGRAM 4M MG G 4M = Specific Device Code (tbd) M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) PIN CONFIGURATION AND SCHEMATIC N/C N/C GND N/C N/C 10 9 8 7 6 12 3 4 5 I/O I/O GND I/O I/O Pin 1 Pin 2 Pin 4 Pin 5 Pins 3, 8 = MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Symbol Value Unit Operating Junction Temperature Range TJ −55 to +125 C Storage Temperature Range Tstg −55 to +150 C Lead Solder Temperature − Maximum (10 Seconds) TL 260 C IEC 61000−4−2 Contact (ESD) IEC 6...