Document
UF4001GP THRU UF4007GP
Features
• Halogen Free Available Upon Request By Adding Suffix "-HF" • Ultra Fast Switching Speed For High Efficiency • Low Leakage • Epoxy Meets UL 94 V-0 Flammability Rating • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix Designates
Compliant. See Ordering Information)
Maximum Ratings
• Operating Junction Temperature Range: -55⁰C to +150⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Typical Thermal Resistance: 40°C/W Junction to Ambient • Typical Thermal Resistance: 20°C/W Junction to Case • Typical Thermal Resistance: 15°C/W Junction to Lead
MCC Part Number
UF4001GP UF4002GP UF4003GP UF4004GP UF4005GP UF4006GP UF4007GP
Device Marking
Maximum Recurrent Peak Reverse
Voltage
UF4001GP UF4002GP UF4003GP UF4004GP UF4005GP
50V 100V 200V 400V 600V
UF4006GP
800V
UF4007GP
1000V
Maximum RMS
Voltage
35V 70V 140V 280V 420V 560V 700V
Maximum DC Blocking Voltage
50V 100V 200V 400V 600V 800V 1000V
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward Current
IF(AV)
1.0A
TA=55⁰C
Peak Forward Surge Current
IFSM
Maximum Instantaneous Forward Voltage
UF4001GP-UF4003GP VF UF4004GP
UF4005GP-UF4007GP
30A
1.0V 1.3V 1.7V
8.3ms,Half Sine
IFM=1.0A; TJ=25⁰C*
Maximum DC Reverse
Current At Rated DC
IR
5.0μA
Blocking Voltage
100μA
TJ=25⁰C; TJ=100⁰C
Maximum Reverse Recovery Time
UF4001GP-UF4004GP trr UF4005GP-UF4007GP
50ns 75ns
IF=0.5A; IR=1.0A; IRR=0.25A
Typical Junction Capacitance
UF4001GP-UF4004GP CJ UF4005GP-UF4007GP
20pF 10pF
Measured at 1.0MHz VR=4.0V
*Pulse Test: Pulse Width 300μsec, Duty Cycle 1% Note:1. High Temperature Solder Exemptions Applied, See EU Directive Annex 7a.
1.0 Amp Glass Passivated Ultra Fast
Recovery Rectifier 50 to 1000 Volts
DO-41
D
Cathode Mark A
B D
C
DIMENSIONS
DIM
INCHES
MM
MIN MAX MIN MAX
A 0.160 0.205 4.10 5.20
B 0.080 0.107 2.00 2.70
C 0.028 0.035 0.71 0.90
D 1.000 ----- 25.40 -----
NOTE
Φ Φ
Rev.3-3-05172022
1/3
MCCSEMI.COM
Curve Characteristics
Average Forward Current (A)
Fig. 1 - Forward Current Derating Curve
1.2
1.0
0.8
0.6
0.4
0.2 Resistive or Inductive Load
0.0 0
25
50
75
100
125
150
Ambient Temperature (°C)
Instantaneous Forward Current (A)
Fig. 3 - Typical Instantaneous Forward Characteristics
10
5 UF4001GP-4003GP
2
1
UF4005GP-4007GP
0.5
UF4004GP
0.2
0.1
0.05 TJ=25°C
0.02
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Instantaneous Forward Voltage (V)
Instantaneous Reverse Leakage Current (μA)
Peak Forward Surge Current (A)
UF4001GP THRU UF4007GP
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
35
30
25
20
15
10
5 8.3 ms Single Half Sine-Wave
0
1
10
100
Number of Cycles at 60 Hz
Fig. 4 - Typical Reverse Leakage Characteristics
100
10
TJ=125°C
1
TJ=75°C
TJ=25°C 0.1
0.01
20
40
60
80
100
120
Percent of Rated Peak Reverse Voltage (%)
Rev.3-3-05172022
2/3
MCCSEMI.COM
Ordering Information
UF4001GP THRU UF4007GP
Device (Part Number)-TP (Part Number)-AP (Part Number)-BP
Note : Adding "-HF" Suffix For Halogen Free, eg. Part Number-TP-HF
Packing Tape&Reel: 5Kpcs/Reel Ammo Packing: 5Kpcs/Ammo Box Bulk:1Kpcs/Box,50Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. Micro Commercial Components Corp. products are sold subject to the general terms and conditions of commercial sale, as published at https://www.mccsemi.com/Home/TermsAndConditions.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committ.