Digitally Programmable Precision Voltage Divider
www.DataSheet.co.kr
19-2229; Rev 1; 7/03
Digitally Programmable Precision Voltage Divider for PGAs
General Description...
Description
www.DataSheet.co.kr
19-2229; Rev 1; 7/03
Digitally Programmable Precision Voltage Divider for PGAs
General Description
The MAX5420 and MAX5421 are digitally programmable precision voltage dividers optimized for use in digitally programmable gain amplifier configurations. The MAX5420/ MAX5421 operate from a single +5V supply or dual ±5V supply, and consume only 3µA supply current. These devices consist of a digitally selectable resistor array that provides four precision noninverting gains of 1, 2, 4, and 8 for PGAs. The MAX5420 and MAX5421 achieve a resistor ratio accuracy of 0.025% (MAX542_A), 0.09% (MAX542_B), and 0.5% (MAX542_C). The MAX5421 includes an on-chip matching resistor for op amp bias-current compensation. The MAX5420 and MAX5421 are available in 8-pin and 10-pin µMAX packages. The devices are specified over the extended temperature range (-40°C to +85°C).
Features
o Four Precision Divider Ratios For Noninverting Gains of 1, 2, 4, and 8 in PGAs o 0.025%, 0.09%, or 0.5% Ratio Accuracy Guaranteed Over -40°C to +85°C o On-Chip Matching Resistor for Op Amp BiasCurrent Compensation (MAX5421) o 5V Single or ±5V Dual Supply Operation o Low 3µA Supply Current o CMOS/TTL Logic Compatible 2-Wire Parallel Interface o Small 8-Pin and 10-Pin µMAX Packages
MAX5420/MAX5421
Applications
General-Purpose Programmable Noninverting Amplifiers Programmable Instrumentation Amplifiers
Ordering Information
PART TEMP RANGE -40°C to +85°C PINPACKAGE 8 µMAX 8 µMAX 8 µMAX 10 µMAX 10 µ...
Similar Datasheet