High-Voltage EL Lamp Driver
Click here for production status of specific part numbers.
MAX14521E
EVALUATION KIT AVAILABLE
Quad, High-Voltage EL Lam...
Description
Click here for production status of specific part numbers.
MAX14521E
EVALUATION KIT AVAILABLE
Quad, High-Voltage EL Lamp Driver with I2C Interface
General Description
The MAX14521E is a quad-output high-voltage DC-AC converter that drives four electroluminescent (EL) lamps. The device features a 2.7V to 5.5V input range that allows the device to accept a variety of voltage sources such as single-cell lithium-ion (Li+) batteries. The lamp outputs of the device generate up to 300VP-P for maximum lamp brightness. The high-voltage outputs are ESD protected up to ±15kV Human Body Model (HBM), ±6kV Contact Discharge, and ±8kV Air Gap Discharge, as specified in IEC 61000-4-2.
The MAX14521E uses a high-voltage full-bridge output stage to convert the high voltage generated by the boost converter to a sinusoidal output waveform. The MAX14521E utilizes a high-frequency spread-spectrum oscillator to reduce the amount of EMI/EFI generated by the boost-converter circuit.
The MAX14521E provides an I2C interface to set the boost converter and EL output switching frequencies through an 8-bit register and the peak output voltages with 5 bits of resolution. The MAX14521E also provides an adjustable automatic ramping feature that slowly increases or decreases the peak output voltage when a change is made to the output amplitude. The slew rate of the automatic ramp is set with 3 bits of resolution through the I2C interface and it is independent for each channel. The MAX14521E features an audio ...
Similar Datasheet