Document
www.DataSheet.co.kr
Series AMLD-IZ
Up to 1200mA | LED Driver
FEATURES: • • • • High Power LED Driver Wide (7:1) Input Voltage Range Remote Control Function 24 Pin DIP Package • • • • Constant Output Current High Efficiency (Up to 96%) Dimming Function (0 – 100%) Operating Temperature range -40ºC - +85ºC
Models Single output
Model
AMLD-3630IZ AMLD-3635IZ AMLD-3650IZ AMLD-3660IZ AMLD-3670IZ AMLD-3680IZ AMLD-3690IZ AMLD-36100IZ AMLD-36110IZ AMLD-36120IZ
Input Voltage (V)
5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36 5-36
Output Voltage (V)
2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32 2-32
Output Current (mA)
300 350 500 600 700 800 900 1000 1100 1200
Efficiency Max (%)
96 96 96 96 96 96 96 96 96 96
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.
Input Specifications
Parameters
Voltage range On/Off Control (Analog Control) Input voltage range (0-12Vdc) (Leave open if not used) Dimming Control (Digital Control)
Nominal
24
Typical
5-36
Maximum
36
Units
VDC
ON: Open or 0V> V <0.6V OFF: 0.6V> V <5V (1mA Max)
Max PWM Frequency (10%~90%) 200Hz 0-4.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3630IZ, AMLD-3635IZ, Dimming Control (Analog Control) AMLD-3650IZ Input voltage range (0-12Vdc)* 0-6.5V (1mA max) Analog Voltage (0%~100%) models: AMLD-3660IZ, AMLD-3670IZ, (Leave open if not used) AMLD-3680IZ, AMLD-3690IZ, AMLD-36100IZ, AMLD-36110IZ, AMLD-36120IZ * NOTE: Exceeding 12Vdc on Dimming Control pin will damage the converter.
Output Specifications
Parameters
Current accuracy Short Circuit protection Output Open Protection Max load capacitance Ripple & Noise
Conditions
Typical
Maximum
Units
%
20MHz Bandwidth
±2 Regulated at the rated current for each model No Load 100 120
µF mV p-p
General Specifications
Parameters
Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Thermal Impedance Humidity Case material
Conditions
100% load
Typical
260 -40 to +85 -40 to +125
Maximum
Units
KHz o C o C o C C/W % RH
o
100 Free Air Convection 13.17 95 Non-Conductive Black Plastic
www.aimtec.com
F 051e R8.F
Tel: +1 514 620 2722 1 of 8
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
Series AMLD-IZ
Up to 1200mA | LED Driver General Specifications (continued)
Parameters
Potting material Weight Dimensions (L x W x H)
Conditions
Typical
Maximum
Units
g
Epoxy (Flammability UL94V-0) 12 1.25 × 0.80 × 0.40 inches 31.80 × 20.30 × 10.20 mm
Pin Out Specifications
Single 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED 22 +Vin 23 +Vin 24 DIM NC: Not Connected
Dimensions
Pin
1
2
3
9
11
20.30 (0.80)
24 23 22 16 14
15.24 (0.60)
31.8 (1.25)
10.2 (0.4)
Mechanical Tolerances
Case tolerance ± 0.25mm or ± 0.01 inches Pin tolerance ± 0.05 or ± 0.002
3.8 (0.15)
2.54 (0.1)
2.54 (0.1)
15.24 (0.6).