IC-DXC

www.DataSheet.co.kr iC-DXC DIGITAL SENSOR I/O DRIVER ar y n i im prel Rev A0.8, Page 1/11 APPLICATIONS o Digital sensors o Light barriers o Proximity switches FEATURES o o o o o o o o o o Configurable high-side, low-side and push-pull operation 200 mA output current I/O-Link complaint 5 µs input filter for spike suppression Reverse polarity protection Current limited output (< 450 mA) Wide supply voltage range from 8 to 30 V Driver shut-down with over temperature Integrated free-wheeling diode for inductive loads Sensor supply voltage output of 5 V at 10 mA PACKAGES DFN8 3x3 BLOCK DIAGRAM VB ..30V VB REG VREF High Side Switch + VOUT CVB 1μF 5V <150 C - CVOUT 100nF.. DIGITAL INPUT OE 36V OUT & 36V NIN & iC-DXC MON FILT CFO GND Low Side Switch GND =1 ++ + VRH VRL Copyright © 2011 iC-Haus http://www.ichaus.com Datasheet pdf - http://www.DataSheet4U.net/ www.DataSheet.co.kr iC-DXC DIGITAL SENSOR I/O DRIVER ar y n i im prel Rev A0.8, Page 2/11 DESCRIPTION The iC-DXC is a simple I/O circuit capable of driving ohmic, inductive and capacitive loads and features integrated reverse polarity protection. The output current is at least 200 mA from a supply voltage of 8 to 30 V. With input OE = high the output works as a push-pull driver controlled by pin NIN. If pin NIN is set either to low or high, the output acts as a high-side (PNP) or low-side (NPN) driver respectively, controlled by the input OE. Forcing the output pin OUT from his current state is sig...